Print Page - OPC is OFF!

Title: OPC is OFF!
Post by: offgridQLD on April 21, 2013, 01:48:40 AM

After updating my classic to the latest firmware this morning. I now have the message (OPC is OFF!) flashing in the bottom right of the classics screen.

its all running fine fine but what is (OPC is OFF !) message telling me?

Thanks

kurt.

Title: Re: OPC is OFF!
Post by: Vic on April 21, 2013, 11:34:38 AM

Hi kurt,

There is a Typo in the title, and mabe if you searched for the term, this would show no results -- OCP is what the CC is saying to you.

See:

http://midnitesolar.com/smf_forum/index.php?topic=1010.msg7096#msg7096

VMM seems to be the required action needed on your part.

Vic

Title: Re: OPC is OFF!
Post by: offgridQLD on April 21, 2013, 05:32:25 PM

Thanks Vic,
Sorry Yes I got it wrong and as you say I did a search and didn't find anything. I should have noted the message down rather than going off my memory :o

Good to know it wont hurt to let it be until next weekend clear it.

Kurt.

A Forum run by Enthusiasts of MidNite Solar

Charge Controllers and Clippers => The "Classic" charge controller => Topic started by: offgridQLD on April 21, 2013, 01:48:40 AM