A Forum run by Enthusiasts of MidNite Solar

Charge Controllers and Clippers => The "Classic" charge controller => Topic started by: pechan on December 25, 2013, 01:02:37 PM

Title: Defcon 4 Warning
Post by: pechan on December 25, 2013, 01:02:37 PM
Hey,
I Started to have a problem with my classic 250 today.

Background info:

5 Classic 250s on Solar and 1 so far on wind.
16,000 watts of solar.
4000 amp hour bank @ 48 volts.

One of my classics is giving me an error, I made a video of the problem that repeats itself every 2 minutes or so.
See full problem @ the 1:09 mark:
http://youtu.be/PbatXPyzG4I?t=28s
Title: Re: Defcon 4 Warning
Post by: TomW on December 25, 2013, 03:04:21 PM
I can't get that video to load properly seems to only be partially there?

Maybe its me?


Tom
Title: Re: Defcon 4 Warning
Post by: Westbranch on December 25, 2013, 03:11:53 PM
Tom I think he means when the screen goes red..., at the start and ~ 1 min in...
Title: Re: Defcon 4 Warning
Post by: tecnodave on December 25, 2013, 03:22:12 PM
Watch closely, when screen goes red , small box appears, FET drive error, and FET temp is 45.9 degrees (C)

td
Title: Re: Defcon 4 Warning
Post by: TomW on December 25, 2013, 03:48:17 PM
Quote from: Westbranch on December 25, 2013, 03:11:53 PM
Tom I think he means when the screen goes red..., at the start and ~ 1 min in...

I mean I cannot get it to play. Period.

No matter, I probably cannot help anyway.

Tom
Title: Re: Defcon 4 Warning
Post by: Westbranch on December 25, 2013, 03:51:02 PM
Oh, Santa has blocked your machine so no surfing today...  ::) :'(
Title: Re: Defcon 4 Warning
Post by: boB on December 25, 2013, 04:33:12 PM

The Local App could probably use some new wording.  that might actually be "OCP" or
Over Current Protection occurring.  Depends on the age/version of your Classic
and the firmware on it.

what is either the serial number or firmware date/version in that Classic ?

Has it been working OK for a while and this just started ?

If this is just an OCP, maybe you have some large battery side loads that
are turning on ?  That might cause this, or at least, OCP's.

BTW, I could see your video just fine here.

boB
Title: Re: Defcon 4 Warning
Post by: laszlo on December 27, 2013, 08:49:24 PM
FYI, I was also able to see the small popop with "Defcon 4".

Could it be a localapp bug , let's suppose, when it gets some out of range value? Or possibly a mini-sweep? I would try to isolate that classic to log onto a different localApp and see if you can still reproduce.
Title: Re: Defcon 4 Warning
Post by: boB on December 27, 2013, 11:07:41 PM

Still would be good to know how old the Classic is and/or firmware version as
well as if you notice large loads coming on when you see the message.

Does it re-occur many times around the time you see it ?  If so, you might
also look at the MNGP to see if it is also giving a message in the status
screen.

Is the Classic turning off momentarily when this happens ?

The Reason For Resting number would also be helpful maybe if it does
go to Resting at this time.

boB