For the first two days using the new SOC readings the Classic was fairly close to the Trimentric, within 1 or 2%. They are both set at 97% efficiency(agm's) and 100 amp hours for the battery capacity. On about the 3rd day they were off a little farther with the Classic reading higher. Then yesterday on the fourth day I came home and the Trimentric was reading 71% and the Classic 98%. By morning the Classic was 97 and the Trimentric at 64. Now the batteries are charging and the Classic says 98, the Trimetric 70. Net AH is -20 so theoretically 80% if the SOC meter was responding. The WBJR is accurately reading the amps in or out and the net AH so it's just the SOC readout that is having problems. I will reboot the Classic to see if I can get it working again.
There is new software and I think it's on the forum and on our web site somewhere.
Still working on stuff but it's making good progress.
I still need to keep the SOC% from flashing if the Auto-Restart is enabled to rest the Classic at midnight.
boB
I just installed the update Ryan posted yesterday in another thread:
http://www.fusion.midnitesolar.com/MidNiteSolarUpdate_1755_2-1-2014_v4.11.exe (http://www.fusion.midnitesolar.com/MidNiteSolarUpdate_1755_2-1-2014_v4.11.exe)
And the latest Local App:
http://kb1uas.com/HighVoltage/LocalApp/LocalStatusPanel.v0.3.37.air (http://kb1uas.com/HighVoltage/LocalApp/LocalStatusPanel.v0.3.37.air)
The latest of both as far as I know.
Tom
Thanks Tom. I will do the updates.
The WBJR is a very nice addition to the Classic and seeing SOC makes it even better.