Just having a look at the bus bars that MidNite sells......and it appears that the biggest wire they will except is a 1/O....am I missing somthing here or do they make one that will work with the 2/O wire I have used?
Thanx, Chris
Quote from: chris on February 02, 2014, 11:26:25 AM
Just having a look at the bus bars that MidNite sells......and it appears that the biggest wire they will except is a 1/O....am I missing somthing here or do they make one that will work with the 2/O wire I have used?
From the bus bar description on Midnite's web site:
QuoteFive, 5/16 studs for battery connections. Comes with auxiliary terminal busbar for six small wires #14-1/0.
You must crimp lugs on your 2/0 cable and attach it to the 5/16 studs.
--vtMaps
Thanx, I did see that.....but was hoping there was one with the screw lock as I don't have a crimper for the large wire.
Not a recommendation of seller, scroll down on the page to see different types of hydraulic crimpers. I have one like the $70.00 one and it works to 2/00.
http://www.ebay.com/sch/sarohs/m.html?item=330554371671&rt=nc&_trksid=p2047675.l2562
We do have similar busbars that accept 2/0 wire. They are used on our HV disconnecting combiners. The foot print is different that the 1/0 busbars. I don't know if we ever put them on our price sheet? If you need 2/0 busbars, just e-mail me with the quantity of wires and sizes and what color (s) you want. We have three different sizes. 5, 7 or 9 and 15 positions. Can't remember if it is 7 or 9. You can see them by looking at the HV disco combiners. They also have very nice push on caps. I found a picture showing the 5 position with caps on.