It has come to our attention that the Relay function of Aux 1 is wired wrong on the board and it is Normally Closed not Normally Open. This has no bearing on the function of Aux 1 when used to transmit a dc voltage only when it is used as a dry contact. We will be working on a small repair kit that will consist of a small relay that you can wire into Aux 1. You would then move the jumpers over to have Aux 1 transmit a dc voltage instead of being a relay this would power the little relay. We will post directions here ASAP on doing this so if you need this function and can not wait for us to send a relay you can pick up a small relay from the auto parts store and make this fix. Here is a link to the repair instruction sheet http://dl.dropbox.com/u/31975941/Aux%201%20relay%20repair.pdf
We apologize for any inconvenience this causes and will work with anyone with this relay issue to correct it. Feel free to Call me or Email me on this matter anytime.
Ryan Stankevitz - Technical Support Manager:
360.403.7207 Ext. 151
ryan@midnitesolar.com