Text only | Text with Images

A Forum run by Enthusiasts of MidNite Solar

Charge Controllers and Clippers => The "Classic" charge controller => Topic started by: Geeky907 on August 26, 2017, 11:00:19 AM

Title: Mix and Match Classics.
Post by: Geeky907 on August 26, 2017, 11:00:19 AM
Greetings,

My Current Configuration is a pair of Midnight Classic 200's Each with 8 Canadian solar 280w Panels <series/parallel approx 120v output> Charging a string of 100x6v AGM Batteries. This system is running a communications site on a remote mountian-top out in the middle of Alaska. which is Ethernet/Microwave Connected to my facility for monitoring.

The site is running a combination of Solar <via the Classics> and Rutland Wind Generators <about 400w each>

Would i be able to add a pair of Classic 150 Lite's exclusively to control the Wind charge, and then network them with the 200's for monitoring?

Thanks!
- Mike Spooner
Geeky907
Title: Re: Mix and Match Classics.
Post by: mahendra on August 26, 2017, 11:28:13 AM
I don't see why it would not be possible
Title: Re: Mix and Match Classics.
Post by: mahendra on August 26, 2017, 11:29:33 AM
I have a classic 150 and a classic lite 200 networked to the same system functioning as a single unit with follow me activated.
Text only | Text with Images