Text only | Text with Images

A Forum run by Enthusiasts of MidNite Solar

Charge Controllers and Clippers => The "Classic" charge controller => Topic started by: openplanet on November 10, 2017, 12:28:02 PM

Title: Aux 1 appears not to be working...
Post by: openplanet on November 10, 2017, 12:28:02 PM
I have two Classics.  Firmware up to date. Same symptom on both:

Aux 1 set to Manual Off - 0 volts
Aux 1 set to Manual ON - 0 volts, and Classic's red LED comes on.

Thoughts?
Thanks.
Title: Re: Aux 1 appears not to be working...
Post by: ClassicCrazy on November 10, 2017, 01:15:28 PM
Look in the manual - there are some jumpers inside the Classic that change the AUX output.

Larry
Title: Re: Aux 1 appears not to be working...
Post by: Westbranch on November 10, 2017, 01:31:11 PM
Were they 'set' via the MNGP,  the Local App or the jumpers?
WBjr?
Text only | Text with Images