Print Page - Classic 150 always shows 100% SOC

Title: Classic 150 always shows 100% SOC
Post by: EAmundson on October 23, 2019, 11:59:15 PM

I have a single Classic 150 hooked up to PV and a single 12V, 200AH battery. The SOC as shown in the My Midnite website is always at 100%, even though battery voltage changes from 12.0 to 14.6.

Any hints on how to fix this?

Title: Re: Classic 150 always shows 100% SOC
Post by: boB on October 24, 2019, 01:49:45 AM

The SOC% on the Classic's display should not be showing up unless you have a Whizbang Junior and shunt connected up to it.

Do you have that ? If so, what kinds of positive and/or negative amps show up on the WB Jr. status screen ?

boB

Title: Re: Classic 150 always shows 100% SOC
Post by: EAmundson on October 24, 2019, 11:54:23 AM

I only have the classic, and I'm only viewing SOC via the mymidnite2 website. In this case, is the SOC something I should ignore?

Title: Re: Classic 150 always shows 100% SOC
Post by: boB on October 24, 2019, 12:19:24 PM

Quote from: EAmundson on October 24, 2019, 11:54:23 AM
I only have the classic, and I'm only viewing SOC via the mymidnite2 website. In this case, is the SOC something I should ignore?

Yes, ignore SOC% for now.

A Forum run by Enthusiasts of MidNite Solar

Charge Controllers and Clippers => The "Classic" charge controller => Topic started by: EAmundson on October 23, 2019, 11:59:15 PM