I am looking at replacing my Rogue 3024 with a Classic 150. The panels are various watts, but the VMP's are within 10% +/-. They are run parallel 24 volts. The voltage loss is under 3%. Will i have to increase the voltage to work with the Classic 150? Or can I keep the current setup and add more panels at 24 volts? The Classic graphs do not show watts under 90. I am trying to figure out how many 24v panels I can run to max out the Classic. Once I get enough panels with IMP's of 10% +/-, I will rewire the like-type panels into 90 volts, if needed. Thank you.