Hi,
Got some new behavior. Every once in a while I'm getting a bump in SOC to 100% on one of my two classics. They each have a wbjr on individual shunts that are inline right next to each other. It's usually 85-90% and then it just jumps to 100.
Screenshots attached from mymidnite. Top cc is the one Showing this. White line is soc.
Is this some sort of reset happening?
Any ideas?
thx
It has been awhile since I used Mymidnite.
Why don't you add battery voltage to your graph and see if anything odd is going on with that ?
If the battery voltage gets to absorb then it will go to 100% .
So either you may have some settings different , or possibly one Classic is reading battery voltage different than the other ( do you have tweaks set for voltage adjustment ?)
Larry
Thx. Voltage is the same for both and not near absorb which is ~56. I don't have any voltage tweaks.
They are in follow me mode. It's weird as I haven't changed any settings on these in a few years.
However, this is the CC noted in https://midniteftp.com/forum/index.php?topic=5082.msg47321#msg47321 . I had a problem where it would not connect to mymidnite. I haven't used mymidnite in a while. The other day I noticed the soc was off on the cc so I checked mymidnite and saw this soc bump.
Weird thing is this CC never used to be able to connect to mymidnite and now it does. I didn't change anything. So maybe there is something wrong with it.