Print Page - WB JR Rev 3 no light or flashing after four years of operation

Title: WB JR Rev 3 no light or flashing after four years of operation
Post by: Bthree on May 28, 2025, 12:33:36 AM

Hi,

I have a whizbang JR attached to a 150 Classic that has stopped working, possibly due to a disconnected -ve line from the shunt to load.

Fault is no flashing light, off totally, checking the line to the 150controller sitting at 0.3 volt removed the wire from the 150controller and now approx 12 volts at controller Aux 2
Extended the signal/power lead four months ago, been working without fault.

Is the WB JR electronics repairable, and will the 150 classic controller be Aux2 functional ?

Sorry for the repeat but need to know

Title: Re: WB JR Rev 3 no light or flashing after four years of operation
Post by: Wizbandit on May 28, 2025, 12:41:28 PM

Email support@midnitesolar.com with your shipping information and I will send you a new one. ATTN:James

A Forum run by Enthusiasts of MidNite Solar

Other MidNite Electronics => WBjr => Topic started by: Bthree on May 28, 2025, 12:33:36 AM