A Forum run by Enthusiasts of MidNite Solar

Charge Controllers and Clippers => The "Classic" charge controller => Topic started by: Dvkall on April 04, 2018, 07:14:01 PM

Title: Front Cover Light
Post by: Dvkall on April 04, 2018, 07:14:01 PM
Is there any way to disable the light on the front cover. Even if it was disabled during the rest period it would be great. I'm on a boat and the light sucks power out I don't need as well as lighting some of my sleeping area.  Other than that I'm quite satisfied with the Classic and it's operation.  Cheers...
Title: Re: Front Cover Light
Post by: ClassicCrazy on April 04, 2018, 07:21:28 PM
There are settings on MNGP  - Main Menu to Misc to LED Mode and scroll through those options to Off .  Then in same Misc menu you will see MNGP and it will let you adjust the display light if you want to do that too.

Larry
Title: Re: Front Cover Light
Post by: FNG on April 10, 2018, 09:27:10 AM
If memory serves it is under "PwrSave" in the MNGP menu and that is in the MISC menu as mentioned
Title: Re: Front Cover Light
Post by: boB on April 10, 2018, 01:51:06 PM
Yes, it's under the MISC menu.  Pwr Save.

It's probably setup for ALWAYS on.  Just set it for like, 1 minute and then
pressing a button will turn it on and then it will fade off after a minute after
you are through pressing buttons.  There is also a 5 minute setting.


boB