Print Page - Help with Auto Gen Start

Title: Help with Auto Gen Start
Post by: carmelo on March 09, 2019, 12:48:29 PM

Hi. I have a Classic 150, which I love, and want to wire the AGS to my Firman 3650 gas generator so when my 48v battery bank goes to 60% it starts the gen and when it goes back to 100% shut the gen off.

My generator have a battery starter and a remote control.

I need help identifying how to correctly wire from the Classic to the Gen.

Here is the info for the Gen:
https://www.firmanpowerequipment.com/shop/open-frame-generator-p03603/

And here is the electric schematic:
https://www.firmanpowerequipment.com/wp-content/uploads/2018/07/P03603-Electrical-schematic.pdf

Any help will be greatly appreciated.

Title: Re: Help with Auto Gen Start
Post by: carmelo on March 09, 2019, 12:54:35 PM

I already have the wbjr connected to a shunt.

Title: Re: Help with Auto Gen Start
Post by: ClassicCrazy on March 09, 2019, 03:35:17 PM

You might get some useful information from this recent discussion
http://midniteftp.com/forum/index.php?topic=3923.0

Larry

Title: Re: Help with Auto Gen Start
Post by: carmelo on March 10, 2019, 07:10:43 AM

Thanks ClassicCrazy.

I still need help interpreting the electric schematic in order to identify the cables that I need to tap.

I dont understand anything.

A Forum run by Enthusiasts of MidNite Solar

General Category => General Discussion => Topic started by: carmelo on March 09, 2019, 12:48:29 PM