Print Page - Updating Firmware

Title: Updating Firmware
Post by: labusker on February 29, 2020, 09:36:41 AM

I will be setting up my classic 150 soon. Can software be updated through the network cable or do I need to use the usb port?

Title: Re: Updating Firmware
Post by: boB on February 29, 2020, 05:29:43 PM

Hi. The Classic needs to have its firmware updated through USB at the moment

Title: Re: Updating Firmware
Post by: labusker on February 29, 2020, 07:12:21 PM

Thanks for the quick reply. I have ordered a mini usb to mini usb for that task.

Title: Re: Updating Firmware
Post by: boB on March 01, 2020, 01:30:54 PM

Quote from: labusker on February 29, 2020, 07:12:21 PM
Thanks for the quick reply. I have ordered a mini usb to mini usb for that task.

Yes, that is how it's done. Let us know of course if you have problems in the update.

Title: Re: Updating Firmware
Post by: labusker on March 02, 2020, 01:10:00 AM

is there any monitoring software out there that an iPad can use?

Title: Re: Updating Firmware
Post by: boB on March 03, 2020, 01:14:39 AM

As far as I know, Adobe Air (API) should still work on Apple products and iPads.

If you can install Adobe Air, then you can install the MidNite Solar Local App

The Local App is monitoring software for the Classic charge controllers.

Title: Re: Updating Firmware
Post by: mike90045 on March 03, 2020, 10:57:32 PM

Quote from: boB on March 03, 2020, 01:14:39 AM

.......The Local App is monitoring software for the Classic charge controllers.

And Control. And register downloads. (Settings/Configuration) and register uploads. Way more than simply monitor

A Forum run by Enthusiasts of MidNite Solar

Charge Controllers and Clippers => The "Classic" charge controller => Classic FAQs => Topic started by: labusker on February 29, 2020, 09:36:41 AM