Got a Classic 250 installed in a DC Solar Trailer. Need the serial number for the status panel. Is that info somewhere in the menu? If so where?
Hope it does not require me to remove it from the trailer because the serial number is on the back of the unit .....
Quote from: keesh on November 02, 2022, 08:31:10 PM
Got a Classic 250 installed in a DC Solar Trailer. Need the serial number for the status panel. Is that info somewhere in the menu? If so where?
Hope it does not require me to remove it from the trailer because the serial number is on the back of the unit .....
Classic screen on MNGP that shows firmware revisions
Bottom right corner shows CL number
That is the number you want to put in Local Status app to be able to do config changes.
Larry
Quote from: keesh on November 02, 2022, 08:31:10 PM
Got a Classic 250 installed in a DC Solar Trailer. Need the serial number for the status panel. Is that info somewhere in the menu? If so where?
Hope it does not require me to remove it from the trailer because the serial number is on the back of the unit .....
Also if it is the CP model Classic keep this in mind as to some limitations ( in case you don't already know)
Larry
"DC SOLAR AUCTION!!
It has come to our attention that there will be an auction featuring a large number of MidNite Classic 250 Charge Controllers. These, As the auction notes, are not standard Classic 250s. They were custom built for an OEM with specific design requirements. In order to reduce cost of these units, many parts and features that were non-essential to their application were removed from these controllers. Because these controllers were purchased as an OEM product and have now been transferred to a third party not associated with the OEM or MidNite Solar, they do not come with any warranty from Midnite Solar.
They DO NOT have multiple MNGP slots so they can not be used in Follow me.
They DO NOT have AUX 1 or 2 terminals so they can't be used with a WBJR or any AUX functions.
They do not have ARC Fault protection.
MNGP can not be programed for Voice.
None of these features can be added back to this board.
They DO HAVE an Ethernet Port so they can be used with MM2 and the Local App.
They can be updated normally using our normal Firmware via USB
They have Ground Fault Protection
BTS input jack is functioning
Thank You
MidNite Solar"