A Forum run by Enthusiasts of MidNite Solar

Charge Controllers and Clippers => Midnite DIY Series => Topic started by: Saggys on December 23, 2022, 07:48:36 PM

Title: 3548 DIY
Post by: Saggys on December 23, 2022, 07:48:36 PM
Is there a specific reason why the 3548 was dropped from the DIY series? This would be a good fit for my present needs and battery bank.
Can the absorb voltage be set to 60vdc?
Title: Re: 3548 DIY
Post by: ClassicCrazy on December 23, 2022, 09:23:51 PM
Ryan did a video comparing this one to the newer model.
https://youtu.be/KPua_iqjtxQ

Larry
Title: Re: 3548 DIY
Post by: Saggys on December 23, 2022, 11:29:22 PM
Thanks Classic Crazy. Is the max absorb voltage only 58.4v like the 5048 model?
Title: Re: 3548 DIY
Post by: ClassicCrazy on December 24, 2022, 12:00:09 AM
Quote from: Saggys on December 23, 2022, 11:29:22 PM
Thanks Classic Crazy. Is the max absorb voltage only 58.4v like the 5048 model?
Look at specs here
https://www.solar-electric.com/midnite-solar-mn5048diy-inverter-charger.html
Title: Re: 3548 DIY
Post by: Saggys on February 17, 2023, 10:38:41 AM
Is the lower operating temperature critical? My Trace PS2512 with SWRC is operating just fine as cold as -22F. I want to use an AIO but keep running into restrictions, such as lower absorb voltage, No BOS components for a listed install(which MS seems to have solved) and operating temperature restrictions.
Title: Re: 3548 DIY
Post by: Saggys on July 01, 2023, 09:12:11 AM
Purchased a MS3548  AIO with E-panel. Currently running a SRNE clone 3548 with pretty good results. Hopefully will get a few more menu options with the MS. Will update when install completed.