Local App Beta firmware REV 0.3.43

[Halfcrazy]

So Andrew has added a lot of functions to the Local App and wanted to get it out there as a Beta release http://kb1uas.com/HighVoltage/LocalApp/LocalStatusPanel.v0.3.43.air

The stuff added:
1- Moved Min and Max voltage boxes to the limits box instead of the T-Comp box
2- Added identifiers on some of the values.
3- Added the temperature reference adjustment for Tcomp of capacity and voltage
4- Removed the redundant port number setpoint
5- Changed the name of a few tweaks for clarity
6- Added the addressing of the classic so for follow me on Lites the addressing can now be done from the local app
7- Added Days between Bulk charge adjustment
8- Added LED mode
9- Added the Tweak to reset Net Amp Hours every time the Classic goes to float

As always Please let me know of any odd behavior and also my to do list for the local app is getting pretty short so if anyone thinks we are missing something please holler

Ryan

[zoneblue]

Awsome, 0.3.43 looks great! No problems so far.

[phxmark]

Would it be possible to make a local app that we can change the battery meter to show the current reading from the WBjr?  Have it look like an automobile amp meter showing negative and positive with 0 pointing straight up?

[dgd]

Would it be possible to make a local app that we can change the battery meter to show the current reading from the WBjr?  Have it look like an automobile amp meter showing negative and positive with 0 pointing straight up?

This has been requested before along with lots of other suggestions to make the local app more useful and meaningful. But, as usual, its a priority and resources issue.

[GHOSTNH]

ok update to this rev for local app

any one care to explain the led modes and what they do?

is there a manua/l text some where describing these new features of this rev?

[boB]

Would it be possible to make a local app that we can change the battery meter to show the current reading from the WBjr?  Have it look like an automobile amp meter showing negative and positive with 0 pointing straight up?

I really like that idea !

Please put my vote in or that as well.

boB

[atop8918]

Me too!
Gotta get The Kid out in Production first, though.

[dgd]

I know there is a comedian at Midnite 
The local app battery voltmeter for a 24volt battery squeezes into the analogue meter display the range numbers
14, 18.75, 23.5, 28.25 and 33
which are too much for the available space and just about overwrite each other.
What about some battery sanity and   for a 24v battery
20, 23, 26, 29 and 32
dgd

[phxmark]

I am having an issue with the local app when trying to set the Aux1 On and Off voltages.

It seems that what ever I put in the On volts field, it always resets to .4  volts above Off volts.

[boB]

I am having an issue with the local app when trying to set the Aux1 On and Off voltages.

It seems that what ever I put in the On volts field, it always resets to .4  volts above Off volts.

Which Aux 1 mode ?  Diversion ?  Waste Not ?  etc ?

The HIGH V will have to be higher than the LOW voltage of course.  But you probably
already knew that.  Also, which code version ?

boB

[phxmark]

I am using PV High.  I am using the latest Local App code version.  I believe it is 3.51.