Does upgrading the Classic firmware require upgrading the MNGP firmware also?

Started by cyberocker, June 14, 2024, 05:31:54 PM

Previous topic - Next topic

cyberocker

Where can one find the MNGP firmware, if required?

Thank you,




ClassicCrazy

From the Midnite webpage .
You do both the Classic firmware update, then do the MNGP update.
They are in the same download - but you want to do both Classic and MNGP so they match .
Info and downloads here
https://www.midnitesolar.com/firmwareReport.php?firmware_ID=19&firmwareProduct_ID=1&act=edit

Larry
system 1
Classic 150 , 5s3p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal 24v pack , Outback 3524 inverter
 5s 135w Kyocero , 3s3p 270w Kyocera   Classic 150 ,8s2p  Kyocera 225w to Hawkes Bay Jakiper 48v 20kwh  ,Gobel 16 kwh  lifepo4 Outback VFX 3648  8s2p 380w Rec pv EG4 6000XP

Wizbandit

I fail to find an "issue" in this thread...
RFR 36 is "Classic RESTING (OFF) from Battery Over Temperature. That HIGH BATTERY setting you have set.  With the BTS unplugged you should get N/A on the MNGP, if not there may be a damaged circuit.

boB


Is this Classic in a system of Classics using the Follow Me cables ?

K7IQ 🌛  He/She/Me