How to Save and Clear Log File

Started by Matrix, November 11, 2017, 08:56:13 AM

Previous topic - Next topic

Matrix

I have searched the forum.  Cannot find this in the manual either.

How to clear and save the log file. 

If I look at the local app the only thing I see is Export on the Data Off line page.  And the Export button is grayed out.  Does not work over network or connected to USB. And I see nothing when scrolling thru the menus on the Classic.

How is this done?
Grid-Assist Off-Grid
REC TwinPeak 2 285W 3S-3P 2565w-STC 1926w-NMOT Array / Classic 150 / Conext SW 4024 Inverter
Trojan L16H-AC 435Ah bank 4S  with 7' of 4/0 cable
24 volt system /  Need 3200Whs Daily
My System Install

estragon

IIRC the export button is greyed out until LA finishes loading the whole log file.  You don't see the downloading unless you scroll down to older data.  When completely downloaded, the export button should work.

Not sure about clearing the log. 

ClassicCrazy

To clear logs via MNGP
On Menu go to Logs , press enter, then you will see options using up down arrows to clear various logs .

Larry
system 1
Classic 150 , 5s3p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal 24v pack , Outback 3524 inverter
 5s 135w Kyocero , 3s3p 270w Kyocera   Classic 150 ,8s2p  Kyocera 225w to Hawkes Bay Jakiper 48v 20kwh  ,Gobel 16 kwh  lifepo4 Outback VFX 3648  8s2p 380w Rec pv EG4 6000XP