New configuration for 24v setup

Started by Simonbr, July 02, 2022, 09:51:38 AM

Previous topic - Next topic

ClassicCrazy

If you can see the name and model number of the compressor in the fridge - then you can probably look it up to see the voltage limits or contact manufacturer and ask them for that info.
Larry
system 1
Classic 150 , 5s3p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal 24v pack , Outback 3524 inverter
 5s 135w Kyocero , 3s3p 270w Kyocera   Classic 150 ,8s2p  Kyocera 225w to Hawkes Bay Jakiper 48v 20kwh  ,Gobel 16 kwh  lifepo4 Outback VFX 3648  8s2p 380w Rec pv EG4 6000XP

Vic

Just finished looking at the fridge's Spec Sheet, and Manual.

Did not know it, but it appears to be able to run on a 250 Watt PV module.  There was no mention of any increased DC current at start-up   ...

Very complete manual. It looks like an efficient fridge.

Simon,

Thanks for the EQ report. Glad that the fridge did not croak, from excessive Vin.

For off-grid systems,  it is fairly common, to run out of sun, for one reason, or another,  interrupting an EQ.   That is why, Tomorrow, was invented!

Of course, as you might be doing more frequent EQs and charging at somewhat higher voltages, please DO keep an eye of electrolyte levels,  and, of course,  keep some Distilled Water on hand.

Thanks for the upate.  Please do let us know how you are doing.   Vic
Off Grid - Sys 1: 2ea SW+ 5548, Surrette 4KS25 1280 AH, 5.25 KW PV, Classic 150,WB, Beta Barcelona, Beta KID
Sys 2: SW+ 5548s, 4KS25s, 5.88 KW PV, 2 ea. Classic 150, WB, HB CC-needs remote Monitoring/Control, site=remote.
 MN Bkrs/Bxs/Combiners. Thanks MN for Great Products/Svc/Support&This Forum!!