spd 115 with out seal

Started by mahendra, June 23, 2013, 06:36:08 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

mahendra

June 23, 2013, 06:36:08 PM
hi i recently bought some spds from naws ,4 spd 300 and 1 spd 115 all were sealed in their boxes, but when i opend the spd 115 it had no seal does this void my warranty?Since i don't think its a re seller fault .
1.5kw on Midnite classic 150(whizbang jr.) networked 0.660kw on classic lite 200 wbjr ,180ah CALB Lifepo4 48v battery bank,jkbms 150amps bms(top balanced) Outback vfx3648.
Soon to be added Sol Ark 8k with 5Dyness Bx51000 ,7.8kw pv

TomW

#1
June 23, 2013, 07:36:21 PM
Ryan told me they had a run of SPD's without seals. I got some myself from the same source. Supposedly not a problem.

Maybe one of the Midnite guys will clarify this. I doubt they would nit pick about the seal on a warranty replacement.

Tom
Do NOT mistake me for any kind of "expert".

( ͡° ͜ʖ ͡°)


24 Trina 310 watt modules, SMA SunnyBoy 7.7 KW Grid Tie inverter.

I thought that they were angels, but much to my surprise, We climbed aboard their starship and headed for the skies

mahendra

#2
June 23, 2013, 08:07:07 PM
ok thanks
1.5kw on Midnite classic 150(whizbang jr.) networked 0.660kw on classic lite 200 wbjr ,180ah CALB Lifepo4 48v battery bank,jkbms 150amps bms(top balanced) Outback vfx3648.
Soon to be added Sol Ark 8k with 5Dyness Bx51000 ,7.8kw pv

Halfcrazy

#3
June 24, 2013, 08:57:44 AM
Yes Tom is correct. There was a fair amount that went out with out a seal. The seal has nothing to do with warranty etc. It was supposed to be to keep people from opening them and getting hurt but in reality the silicone seal is so tuff I am not sure one could open one without special tools so we did not worry to much about it.

Ryan
Changing the way wind turbines operate one smoke filled box at a time
Print
Go Up Pages1
User actions