New Firmware 2050 8-5-15

Started by Resthome, August 10, 2015, 12:39:39 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Resthome

August 10, 2015, 12:39:39 AM Last Edit: August 11, 2015, 08:27:23 AM by Resthome
The link for the new Classic 2050 - 8-5-15  is missing the /firmware/ part of the URL.

It would also be nice if someone posts to the fourm when new firmware is available. 


Seems to be working now for most people.
John

10 x Kyocera KC140, Classic 150 w/WBJr, Link10 Battery Monitor, 850 AH @ 12v Solar One 2v cells, Xantrex PROwatt SW2000
Off Grid on Houseboat Lake Don Pedro, CA

dgd

#1
August 10, 2015, 12:54:56 AM
so is this the version that has fixed the ethernet reliability problems?  is there a list of fixes and additions?
dgd
Classic 250, 150,  20 140w, 6 250w PVs, 2Kw turbine, MN ac Clipper, Epanel/MNdc, Trace SW3024E (1997), Century 1050Ah 24V FLA (1999). Arduino power monitoring and web server.  Off grid since 4/2000
West Auckland, New Zealand

Resthome

#2
August 10, 2015, 05:44:17 AM
Quote from: dgd on August 10, 2015, 12:54:56 AM
so is this the version that has fixed the ethernet reliability problems?  is there a list of fixes and additions?
dgd

These are the listed changes in the change log since the previous production firmware. Looks like there were a number of versions before this one was put out.
John

10 x Kyocera KC140, Classic 150 w/WBJr, Link10 Battery Monitor, 850 AH @ 12v Solar One 2v cells, Xantrex PROwatt SW2000
Off Grid on Houseboat Lake Don Pedro, CA

Halfcrazy

#3
August 10, 2015, 10:57:20 AM
Hm the link works here? So the new improved networking stuff can not be released as production because the new My midnite site it talks to is not done. Sort of aggravating but that is the hold up now.

Ryan
Changing the way wind turbines operate one smoke filled box at a time

Resthome

#4
August 10, 2015, 04:34:48 PM
Could have been my poor internet connection at the lake. However when I went to the firmware link it did download on the same connection.
John

10 x Kyocera KC140, Classic 150 w/WBJr, Link10 Battery Monitor, 850 AH @ 12v Solar One 2v cells, Xantrex PROwatt SW2000
Off Grid on Houseboat Lake Don Pedro, CA

MGP

#5
August 10, 2015, 05:31:33 PM
So does the new firmware report to the new MM2 web site ?? or only the OLD MM1??
Cheers
3.4Kw Solar panels 1x MX60 1x C150 WBJr
H200 Whisper turbine ,MN Clipper and C150
1100ah 24v Wet batteries
SP Pro 24v 4.5kw Inverter 185amp Charger
Lorentz PS600HR DC powered Deep Well Sub Pump.
Recycling Sun Shine Off Grid for 14yrs

CDN-VT

#6
August 10, 2015, 05:51:17 PM Last Edit: August 19, 2015, 11:57:20 AM by CDN-VT
Quote from: Resthome on August 10, 2015, 12:39:39 AM
The link for the new Classic 2050 - 8-5-15  is missing the /firmware/ part of the URL.

It would also be nice if someone posts to the fourm when new firmware is available.   :-\

Rest try this : http://fusion.midnitesolar.com/MidNiteSolarUpdate_2050_8-5-2015_v4.89.exe

I'll ask again on this midnight solar setup files for the firmware ?  I looked in 2 of my CD's that came with the classics ,a good look on the midnight solar web site . I do not see what they are saying on the video or on the web pages of firmware & you must register.

Any hints ?
Thanks VT

Well I opened the firmware of 18XX and they have the application file in there . I have been saving & storing firmwares but have not flashed one as of yet . Mine in use came with 1941 or close .. But I do have the screen flash Got Comms ? and the WB Jr battery percentage is there for only an eyewink .

VT

Canadian Solar 350W 37.6 VOC  30.6 VMP 8.22 ISC 7.87 IMP ,-15 c +30c max  4 strings in 2 in Series for 24v Classic 150 -1020 Ah  Freezers & fridges ~~~ Second Array same panels of 3sx3 parallel for 24 V Classic 150 -440 Ah Outback Barns & out blds.
48Vdc almost done,11Strings up of 3s11P same panels

mike90045

#7
August 10, 2015, 10:00:33 PM
Quote

Rest try this : http://fusion.midnitesolar.com/MidNiteSolarUpdate_2050_8-5-2015_v4.89.exe
.......

This file downloaded for me.
http://tinyurl.com/LMR-Solar

Classic 200| 2Kw PV, 160Voc | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph )| Listeroid 6/1, st5 gen head | XW6048 inverter/chgr | midnight ePanel & 4 SPDs | 48V, 800A NiFe battery bank | MS-TS-MPPT60 w/3Kw PV

boB

#8
August 11, 2015, 03:51:33 AM Last Edit: August 11, 2015, 12:31:41 PM by boB

Nevermind this message...

boB
K7IQ 🌛  He/She/Me
Print
Go Up Pages1
User actions