connectivity issue with classic lite 200

Started by mahendra, September 09, 2015, 12:09:49 PM

Previous topic - Next topic

mahendra

OK so here is the the  thing for >for a while now my classic lite will not connect to the local app but my classic 150 does just fine.
Both classics are on the same system and are set up for follow me.

Initially i thought it was an issue with my cat 5 network cable that is run for the classic lite but after doing all that have could have been possible done it still would not connect at the same time it is not connecting to my midnite either.


These are all of the measure i have tried to resolve the issue:
Quick reset
hard reset
firmware upgrade followed by hard rest
testing of network cable(results show that cable is OK)
change of cable

Please help,Thanks in advance!
1.5kw on Midnite classic 150(whizbang jr.) networked 0.660kw on classic lite 200 wbjr ,180ah CALB Lifepo4 48v battery bank,jkbms 150amps bms(top balanced) Outback vfx3648.
Soon to be added Sol Ark 8k with 5Dyness Bx51000 ,7.8kw pv

zoneblue

Just checking, do you have them setup with the same static IP addresses?
6x300W CSUN, ground mount, CL150Lite, 2V/400AhToyo AGM,  Outback VFX3024E, Steca Solarix PL1100
http://www.zoneblue.org/cms/page.php?view=off-grid-solar

mahendra

No not really will recheck just to make sure .
1.5kw on Midnite classic 150(whizbang jr.) networked 0.660kw on classic lite 200 wbjr ,180ah CALB Lifepo4 48v battery bank,jkbms 150amps bms(top balanced) Outback vfx3648.
Soon to be added Sol Ark 8k with 5Dyness Bx51000 ,7.8kw pv

Westbranch

one option is to move the MNGP to the lite and make sure everything is set properly, then move it back...
KID FW1811 560W >C&D 24V 900Ah AGM
CL150 29032 FW V.2126-NW2097-GP2133 175A E-Panel WBjr, 3Px4s 140W > 24V 900Ah AGM,
2 Cisco WRT54GL i/c DD-WRT Rtr, NetGr DS104Hub
Cotek ST1500 Inv  want a 24V  ROSIE Inverter
OmniCharge3024  Eu1/2/3000iGens
West Chilcotin 1680+W to come

mahendra

1.5kw on Midnite classic 150(whizbang jr.) networked 0.660kw on classic lite 200 wbjr ,180ah CALB Lifepo4 48v battery bank,jkbms 150amps bms(top balanced) Outback vfx3648.
Soon to be added Sol Ark 8k with 5Dyness Bx51000 ,7.8kw pv

boB

Yes, the MNGP swap and also move (temporarily for testing) the working 150s Ethernet cable to
the Classic Lite to see if it talks.

boB
K7IQ 🌛  He/She/Me

keppelk

I've got my Classic 200 and Classic 200 Lite connected together with phone cables (and also setup for Follow Me). Once you've setup each Classic with a unique address, then you can use your single MNGP to address both Classics. Use the left + up and left + down buttons on the MNGP to select the address of the Classic you want to view/configure. Much easier than taking off the covers and swapping the MNGP cable between Classics.

Even with the latest firmware I still get occasional network crashes (one Classic won't show up in Local App until auto-reboot at midnight), so being able to use the MNGP to view both Classics is a very useful feature.

mahendra

Thanks guys but i had two issues that i over looked that was causing the problem one was dns and the other was identical ip addresses.
Silly me!!
1.5kw on Midnite classic 150(whizbang jr.) networked 0.660kw on classic lite 200 wbjr ,180ah CALB Lifepo4 48v battery bank,jkbms 150amps bms(top balanced) Outback vfx3648.
Soon to be added Sol Ark 8k with 5Dyness Bx51000 ,7.8kw pv