Windows 10 updater

Started by Halfcrazy, January 25, 2016, 02:00:36 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Halfcrazy

January 25, 2016, 02:00:36 PM Last Edit: January 25, 2016, 02:59:29 PM by Halfcrazy
So it took a little longer to get this on the market than I had hoped, Sorry for the delay. Here is a link to the Windows 10 updater page.
http://www.midnitesolar.com/firmware.php?firmwareProduct_ID=1
Changing the way wind turbines operate one smoke filled box at a time

ClassicCrazy

#1
January 25, 2016, 03:42:30 PM
Is this any different than the Beta version I tried out Ryan ? That one worked perfectly for me. 
Larry
system 1
Classic 150 , 5s3p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal 24v pack , Outback 3524 inverter
 5s 135w Kyocero , 3s3p 270w Kyocera   Classic 150 ,8s2p  Kyocera 225w to Hawkes Bay Jakiper 48v 20kwh  ,Gobel 16 kwh  lifepo4 Outback VFX 3648  8s2p 380w Rec pv EG4 6000XP

Halfcrazy

#2
January 25, 2016, 07:20:27 PM
it is the same one.
Changing the way wind turbines operate one smoke filled box at a time

mike90045

#3
January 25, 2016, 11:52:02 PM
What are the chances it would work with win 8.1 ?
http://tinyurl.com/LMR-Solar

Classic 200| 2Kw PV, 160Voc | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph )| Listeroid 6/1, st5 gen head | XW6048 inverter/chgr | midnight ePanel & 4 SPDs | 48V, 800A NiFe battery bank | MS-TS-MPPT60 w/3Kw PV

Halfcrazy

#4
January 26, 2016, 06:53:15 AM
Quote from: mike90045 on January 25, 2016, 11:52:02 PM
What are the chances it would work with win 8.1 ?

My understanding is to make it work on any older OS's you need to install the classics USB driver plus a few other windows files. So if you have to go through the driver install anyhow I am not sure its worth the hassle
Changing the way wind turbines operate one smoke filled box at a time
Print
Go Up Pages1
User actions