classic charge controller on wind turbine of different voltage than battery bank

Started by mahendra, February 10, 2013, 07:55:35 AM

Previous topic - Next topic

mahendra

hi there a again i dont mean to be a pain but you guys have been really great thats the reason why i am always back for great support.

My question this time to Midnite is, a good friend is giving me one of those Southwest Wind turbines to add to my existing off grid system.
The turbine is a 48V industrial type without the electronic regulator seen in the newer models like the Air 30 also from South west Wind.
Will this work on my existing 12v battery bank system.Will it convert the excess Voltage generated to 12v nominal  for the battery bank.
1.5kw on Midnite classic 150(whizbang jr.) networked 0.660kw on classic lite 200 wbjr ,180ah CALB Lifepo4 48v battery bank,jkbms 150amps bms(top balanced) Outback vfx3648.
Soon to be added Sol Ark 8k with 5Dyness Bx51000 ,7.8kw pv

mahendra

Will a classic charge controller do the job required,Because i am planning to get one more for that purpose.
1.5kw on Midnite classic 150(whizbang jr.) networked 0.660kw on classic lite 200 wbjr ,180ah CALB Lifepo4 48v battery bank,jkbms 150amps bms(top balanced) Outback vfx3648.
Soon to be added Sol Ark 8k with 5Dyness Bx51000 ,7.8kw pv

boB


An Air X or Breeze SWWP turbine should work without its regulation circuitry.

That's DC output, right ?

boB

K7IQ 🌛  He/She/Me

mahendra

1.5kw on Midnite classic 150(whizbang jr.) networked 0.660kw on classic lite 200 wbjr ,180ah CALB Lifepo4 48v battery bank,jkbms 150amps bms(top balanced) Outback vfx3648.
Soon to be added Sol Ark 8k with 5Dyness Bx51000 ,7.8kw pv