ALPHA MyMidNite test site

Started by atop8918, March 04, 2015, 03:44:51 AM

Previous topic - Next topic

atop8918

Just a place to collect thoughts, bugs, and concerns for the new MyMidNite ALPHA test site.

Anyone who has loaded the beta Ethernet lockup firmware and are using the new test server, please feel free to post your concerns here.


ClassicCrazy

#1
The auto update is working for me.

I can't  delete the test tab that I made. i go to settings for that tab and then hit delete but it does not go away.
see screenshot.

system 1
Classic 150 , 5s3p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal for 24v pack , Outback 3524 inverter
system 2
 5s 135w Kyocero , 3s3p 270w Kyocera  to Classic 150 ,   8s Kyocera 225w to Hawkes Bay Jakiper 48v 15kwh LiFePO4 , Outback VFX 3648 inverter
system 3
KID / Brat portable

atop8918

Ok, I'll take another look -- works okay on the test instance, must be a stupid permissions problem in the database.

ClassicCrazy

 For the Energy ( daily kwh )  if you move the decimal one digit to the left it will be correct - and change the legend from wh to kwh .
system 1
Classic 150 , 5s3p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal for 24v pack , Outback 3524 inverter
system 2
 5s 135w Kyocero , 3s3p 270w Kyocera  to Classic 150 ,   8s Kyocera 225w to Hawkes Bay Jakiper 48v 15kwh LiFePO4 , Outback VFX 3648 inverter
system 3
KID / Brat portable

ClassicCrazy

Yes the Charge status is working for me on MyMidnite now - it even reads for the past history.

Larry
system 1
Classic 150 , 5s3p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal for 24v pack , Outback 3524 inverter
system 2
 5s 135w Kyocero , 3s3p 270w Kyocera  to Classic 150 ,   8s Kyocera 225w to Hawkes Bay Jakiper 48v 15kwh LiFePO4 , Outback VFX 3648 inverter
system 3
KID / Brat portable

atop8918

Excellent! It always bothered me that the past history didn't show in the status badge, finally had a chance to do it the right way.

shawn_1976

I am currently using the "mymidnite" Is there new software to test? If so how do I go about it?

Thanks

atop8918

#7
Hi,
Please check out the thread:
http://www.midniteforum.com/index.php?topic=2364.0

But be warned, this is all ALPHA testing and many things may not work including the Classic itself.

Thanks,
-Andrew

ClassicCrazy

I had no problems with or after  doing this update
Larry
system 1
Classic 150 , 5s3p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal for 24v pack , Outback 3524 inverter
system 2
 5s 135w Kyocero , 3s3p 270w Kyocera  to Classic 150 ,   8s Kyocera 225w to Hawkes Bay Jakiper 48v 15kwh LiFePO4 , Outback VFX 3648 inverter
system 3
KID / Brat portable

shawn_1976

I will wait until the full release. I dont need any surpises. Any idea when it will be ready?

Thanks

atop8918

No, there is no timeline at the moment. We are mostly working out the bugs on the device itself, the website release will be gated on that and the website buglist itself.
Thanks!

ClassicCrazy

The time zone does not seem to work - I reset it again to Central time zone which it already said it was on -  so will see what it does in the future but all the past times shown on My Midnite are not correct. 
system 1
Classic 150 , 5s3p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal for 24v pack , Outback 3524 inverter
system 2
 5s 135w Kyocero , 3s3p 270w Kyocera  to Classic 150 ,   8s Kyocera 225w to Hawkes Bay Jakiper 48v 15kwh LiFePO4 , Outback VFX 3648 inverter
system 3
KID / Brat portable

atop8918

Thanks,
Raechel was seeing bad behavior with the timezone as well. I was hoping the latest fixes would work; they did pass all the tests, but seems like the tests are busted too. I'll get back in there once I get the hood up.

ClassicCrazy

#13
I was doing equalize today - when sun started going down the status went from Equalize to Unknown(18) for about two hours and then switched over to Resting .  Maybe the Unknown(18) status was running out the Equalize timer before it went to Resting ?
Larry
system 1
Classic 150 , 5s3p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal for 24v pack , Outback 3524 inverter
system 2
 5s 135w Kyocero , 3s3p 270w Kyocera  to Classic 150 ,   8s Kyocera 225w to Hawkes Bay Jakiper 48v 15kwh LiFePO4 , Outback VFX 3648 inverter
system 3
KID / Brat portable

ClassicCrazy

#14
Quote from: atop8918 on March 15, 2015, 04:42:03 AM
Thanks,
Raechel was seeing bad behavior with the timezone as well. I was hoping the latest fixes would work; they did pass all the tests, but seems like the tests are busted too. I'll get back in there once I get the hood up.
Andrew ,
Any progress on getting the timezone time  problem resolved ? My friends MyMidnite alpha has been locking up sometimes. Will run good all week but now it locked up again for some reason. I am having them reset their modem/router now to see if that is what is causing it. Last time I had them reset the Classic and that fixed it but I wasn't sure if they had also reset their modem.

It makes it difficult to pinpoint the time it is locking up because the time is not correct on MyMidnite page. I haven't put any effort to figure out if the times on there are UTC or not.

My own system has never locked up and always reports.

Thanks,
Larry
system 1
Classic 150 , 5s3p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal for 24v pack , Outback 3524 inverter
system 2
 5s 135w Kyocero , 3s3p 270w Kyocera  to Classic 150 ,   8s Kyocera 225w to Hawkes Bay Jakiper 48v 15kwh LiFePO4 , Outback VFX 3648 inverter
system 3
KID / Brat portable