Unlock Classic

Started by stuman, April 02, 2015, 07:42:43 PM

Previous topic - Next topic

stuman

I think I've asked this before, but now I have one I can get to if I need to.  How do I enable the update options of the local app?  I entered the serial number and nothing happened.

Resthome

#1
I believe you just enter the number and not the CL. Is that what you are doing one the CONFIG basic screen?
John

10 x Kyocera KC140, Classic 150 w/WBJr, Link10 Battery Monitor, 850 AH @ 12v Solar One 2v cells, Xantrex PROwatt SW2000
Off Grid on Houseboat Lake Don Pedro, CA

TomW

#2
be sure to click the little blue?? "enter" arrow to the right of the spot you enter the serial number so it gets saved.

Just the number, not the "CL" as Resthome noted.

Good Luck with it.

Tom
Do NOT mistake me for any kind of "expert".

( ͡° ͜ʖ ͡°)


24 Trina 310 watt modules, SMA SunnyBoy 7.7 KW Grid Tie inverter.

I thought that they were angels, but much to my surprise, We climbed aboard their starship and headed for the skies

stuman

I have this problem with both of my Classic 150's.  Maybe I'm not finding the right number.  There is no CL in front of it.  Am I not looking at the right label? A picture of the label with the number would be nice...

stuman

Ok, silly me.  Looked over the "in progress" documentation at the pictures of the labels.  I see what I've been doing wrong.

Will try again this weekend.

laszlo

The serial number  is on the left side of the Classic ( your right )  and it has a barcode also.
4.6KW offgrid PV system, Classic 200, MX60, dual Magnum PAE 4448 inverters, Midnite combiner and disconnect boxes, e-panel,  WBJr, and 8 MN SPDs

Halfcrazy

It can also be found on the box on the same barcode label as well as by pushing status 6 times it will be on that screen in the bottom right corner.
Changing the way wind turbines operate one smoke filled box at a time