48 VDC NiFE Cells

Started by Herman, June 26, 2015, 03:03:23 AM

Previous topic - Next topic

mike90045

summer time, I get nice long, 5 & 6 hour float times, and winter, they seldom get full, so my bank has been going strong for 4+ years.  going to have to drain and refill, not this summer, but next.   Going to be a pain.
http://tinyurl.com/LMR-Solar

Classic 200| 2Kw PV, 160Voc | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph )| Listeroid 6/1, st5 gen head | XW6048 inverter/chgr | midnight ePanel & 4 SPDs | 48V, 800A NiFe battery bank | MS-TS-MPPT60 w/3Kw PV

Herman

Thanks Bio if it is of the same as Ozzie requirements as we are 240 Volt AC @ 50 HZ i think over in the us you are 110 volt AC not sure on your HZ

BioPower

Hi Herman

The Midnite Inverter will work with 240V & 50 hz don't forget these guys designed the outback gear.
9.5 KW Solar Panels, 2 Midnite Classic 150, 8 KW self-built 8 KW Inverter,  5KW AC coupled grid tie Inverter, Exide 775AH @C5 48V forklift battery

Herman

That is good news and even better if it is the same distributor they use for the Classic MPPT's here in OZ i can guarantee  i will be knocking down the door when it arrives.