Does Midnite Solar make an E-Panel that fits Magnum MSH3012 inverter?

Started by outwestbound, March 01, 2016, 05:02:19 PM

Previous topic - Next topic

outwestbound

Hi. I have a very compact install of a large solar system in fifth wheel travel trailer. I don't know much about all this, but understand that an E-Panel will allow consolidation of some of the breakers, disconnects, etc. for a more "compact" install. This is my goal: compact.

Does a panel exist for this HYBRID inverter?

Thanks

tecnodave

Outwestbound,

I am not sure on this but I think that you would use the same panel as for the MSH-4024 or the MS-4024....... MidNite makes two variants of the Magnum panel........one is 120 (North America) or 220 (not North American) volt only......

The other is 120/240 split phase and is only used with the MS-PAE-XXXX and the MS-AE-XXXX
This one is not approiate for you as you are 120 volt only

The only difference between the panel for the MSH-3012 and the MSH-4024 will be the size of the DC inverter breaker.     Not sure on that but 250 amps?.......I'm using 250 amp breaker for my Magnum MS-AE-4024     MidNite breakers but my own design panel

Td
#1 Classic 150 12 x Sharp NE-170, 2S6P, 24volt L-16 Rolls-Surette S-530, MS4024 & Cotek ,  C-40 dirv.cont. for hot water
#2 Classic 150 12 x Sharp NE-170, 2S6P, 24 volt L-16 Interstate,Brutus Inv.
#3 Kid/WBjr 4/6 Sanyo 200 watt multilayer 4/6 P
#4 Kid/WBjr 4/6 Sanyo 200 watt multilayer 2S 2/3 P