Fans always running on my new Classic 200

Started by dapago, December 10, 2016, 10:52:23 AM

Previous topic - Next topic

Westbranch

#15
Strange I just clicked on both  link copies  and they both worked...  ???
KID FW1811 560W >C&D 24V 900Ah AGM
CL150 29032 FW V.2126-NW2097-GP2133 175A E-Panel WBjr, 3Px4s 140W > 24V 900Ah AGM,
2 Cisco WRT54GL i/c DD-WRT Rtr, NetGr DS104Hub
Cotek ST1500 Inv  want a 24V  ROSIE Inverter
OmniCharge3024  Eu1/2/3000iGens
West Chilcotin 1680+W to come

TomW

Quote from: Westbranch on December 13, 2016, 03:51:30 PM
Strange I just clicked on both  link copies  and they both worked...  ???

WB;

My Bad., Senior Moment. I had the javascript disabled here. I just don't let every site run them.

Must be nap time  ::)

Tom
Do NOT mistake me for any kind of "expert".

( ͡° ͜ʖ ͡°)


24 Trina 310 watt modules, SMA SunnyBoy 7.7 KW Grid Tie inverter.

I thought that they were angels, but much to my surprise, We climbed aboard their starship and headed for the skies

CDN-VT

#17
I removed all my turbo fans for storage . them are the ones that ALSO need a bead or 3 of silcone for the plastic to case rattle. , I removed gobs .
Spare in a Faraday

So go into temps under menu & see what the temps are .
I walk in to the power room & feel the tops of all the classics if the fans are quite , Id like to feel warm .
Canadian Solar 350W 37.6 VOC  30.6 VMP 8.22 ISC 7.87 IMP ,-15 c +30c max  4 strings in 2 in Series for 24v Classic 150 -1020 Ah  Freezers & fridges ~~~ Second Array same panels of 3sx3 parallel for 24 V Classic 150 -440 Ah Outback Barns & out blds.
48Vdc almost done,11Strings up of 3s11P same panels

mike90045


If you are really  concerned about EMP on those controller, wait for a humid day (fog or rain) and slowly take off the electrostatic hot plastic.   The blue, pink or silver ESD bags, or even a plain paper sack, is safer than the plain plastic bag which can generate a LOT of static and fry stuff even before you can feel a shock.
http://tinyurl.com/LMR-Solar

Classic 200| 2Kw PV, 160Voc | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph )| Listeroid 6/1, st5 gen head | XW6048 inverter/chgr | midnight ePanel & 4 SPDs | 48V, 800A NiFe battery bank | MS-TS-MPPT60 w/3Kw PV

russ_drinkwater

CDN you are more of a "bucket case" than me! :o ;D
Get a gal garbage tin as you can fit more in them!
Where do you store your backup solar panels?
Standalone. 20 Hyundai x 220 watts panels, 2 x classic 150's, Latronics 24 volt 3kw inverter, Whiz bang Jnr, 12 Rolls surrete  4KS 25P  batteries and WBJ.
Grid tie feed-in, 12.5 kw in 3 arrays generating 50 kws per day average. Solar river grid tie inverters

CDN-VT

Buckets / panels / DVM ,plus spare &  storage all in a cloud .

VT
Canadian Solar 350W 37.6 VOC  30.6 VMP 8.22 ISC 7.87 IMP ,-15 c +30c max  4 strings in 2 in Series for 24v Classic 150 -1020 Ah  Freezers & fridges ~~~ Second Array same panels of 3sx3 parallel for 24 V Classic 150 -440 Ah Outback Barns & out blds.
48Vdc almost done,11Strings up of 3s11P same panels