Local App Starts and Does Not Display Control Panel

[bdimambro]

I run the Local App on a Windoze 10 system and it has run fine. Now when I try to start it, it looks like the Local app starts, just does not display anything. I mean, the status/control/display part of the app does not start. Noy displayed.

Any ideas?

Brian

[ClassicCrazy]

I would un install and re install it and see if that fixes your problem.
For some reason after last updates or last window updates I always get some kind of incompatibility or some sort of  message when I start local status app but I just close that and everything works .
Best thing is if you have Android is the get Grahams Classic Monitoring App which always works without errors.

Larry

[bdimambro]

Thanks Larry,

Yea I did the uninstall and then reinstalled it with the same error. I'll have a look at the Amdroid app.

Thanks,

brian

[bdimambro]

Is there a Windoze alternative to the Local App?

Thanks,

BRian

[Resthome]

I run the Local App on a Windoze 10 system and it has run fine. Now when I try to start it, it looks like the Local app starts, just does not display anything. I mean, the status/control/display part of the app does not start. Noy displayed.

Any ideas?

Brian

Sounds like you have a network problem. Is the LA Configuration set to AutoDectect your Classic? Is the IP address correct on both the Classic and LA? Is the Classic connected to a Wireless router? Post a screen shot of what you see on the LA.

[bdimambro]

Thanks for the advice. I was able to get this working ... seems my laptop thought it had a 2nd monitor (it does not) and just had to attach a 2nd and then make sure the laptop display was the master display. This seems to have fixed it.

Thank you all for your help!!

Brian

[ClassicCrazy]

Is there a Windoze alternative to the Local App?

Thanks,

BRian

You can get Android emulators that run on Windows and then run the android Classic Monitoring app on that is one alternative.
I used Memu but there are other emulators out there too.

Larry