"Float" time with no sense

Started by binkino, May 29, 2023, 10:04:12 AM

Previous topic - Next topic

binkino

Hi,

I've noticed this for a while now...

In the "Float" section, a value that makes no sense is displayed to me every time the page is called up.
Also, if I enter a new value (time) here and store or send it, this strange value appears again after calling this page again.

What can be the reason and how can I fix it?

See the picture attached.

Thanks, Andy
PV-OUTPUT: http://pvoutput.org/list.jsp?id=38617
Classic Lite 200 + Classic 200 + Easun ISolar-SMX-II-5.6KW + 12x240Wp + 12x255Wp + 2x10kWh LFP
http://a68k.de/Solar/Monitor_LC2.php

Wizbandit

It's a bug.  Go to the Classic and set the ABSORB TIME to 02:00 and SAVE.  You attempted to set it from the LA and over-ran the variable memory location.  No fix, we have to live with it...

ClassicCrazy

system 1
Classic 150 , 5s3p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal for 24v pack , Outback 3524 inverter
system 2
 5s 135w Kyocero , 3s3p 270w Kyocera  to Classic 150 ,   8s Kyocera 225w to Hawkes Bay Jakiper 48v 15kwh LiFePO4 , Outback VFX 3648 inverter
system 3
KID / Brat portable

boB


Don't think I knew about that bug ?

K7IQ 🌛  He/She/Me

binkino

ok thanks,
that is possible for me on the first with MNGP, but on the other ... :)
(still looking for a MNGP for "small money")
PV-OUTPUT: http://pvoutput.org/list.jsp?id=38617
Classic Lite 200 + Classic 200 + Easun ISolar-SMX-II-5.6KW + 12x240Wp + 12x255Wp + 2x10kWh LFP
http://a68k.de/Solar/Monitor_LC2.php

boB


The MNGP probably isn't as expensive as the shipping cost ??

Wish I was going to Germany soon, I would put one in my bag for you.

boB
K7IQ 🌛  He/She/Me