Kilowatt hours still not correct

[qrper]

I did find out there is a revert to factory image in the MNGP2, This will allow a stuck update to be forced all the way back to factory and allow you to update again.

To do this:
1- Power down the MNGP2 and when screen is dark wait 15 seconds.
2- Hold the back button and power on MNGP2 and continue holding back button for 15 seconds
3- MNGP2 will go through a update process and revert to the stored factory image
4- Update again using the beta app

Great info... goin' print this out an hang near the system

mike