Rosie Data Log Bat Min Voltage error

[aaapilot]

I've noticed after installing BETA 24.01.17.01, the Bat Min voltage ALWAYS reads 0.2V. The HB Data Log using the same BETA date software lists a correct Bat Min voltage.  Pics below show 2 consecutive days of Both displays.  I have verified that the Rosie displayed this number correctly w/the BETA firmware prior to 24.01.17.01, but I have since cleared the log, so I don't have a pic.  I've reset all parameters and reloaded data 2x and its hasn't changed the results. I have not loaded the new BETA released yesterday, but it did not list this particular issue as a 'fix', though that doesn't mean it won't fix it . Just checking to see if anyone else is seeing this.  Thanks.

[aaapilot]

Update after uploading latest BETA 24:02:13:01 for the Rosie.  Unfortunately, no change.  The Rosie Data Log still shows Min Voltage as 0.2V regardless of actual low voltage for the day.  Max Voltage does read correct, as before.  Can anyone else verify or is it just my machine?

[Highflyer]

I see it s well.  It has been reproted.

[aaapilot]

I see it s well.  It has been reproted.

Thanks Highflyer