Dark Forest Solar

[DarkForestSolar]

I am located in eastern Washington, but do a lot of designs for Colorado and other places in the NW primarily.  Been doing battery based PV systems since the 90's (grew up off grid in eastern WA), and installed for about 20 years in Colorado front range.  Now, I'm not doing much install work, mostly doing design work for electricians and builders and installers who are doing the on the ground side of it.  I've designed off grid systems between 10 watts and 62kW (actually designed a few larger ones, but the 62kW one is the largest one that is up and operating).  Used a lot of Outback and Magnum equipment over the years, some Schneider, and some Victron and some SolArk, but am trying to migrate to mostly Midnite now. For my own off grid system I'm using a hodge podge of old stuff -- Trace SW4024, a salvaged nickle iron battery bank, old MX60's (not the FM60s, so you can figure out how old...).   Hoping to upgrade most of that to a Rosie and LFP's this summer and finally join the 2020's