Latest firmware Mymidnite stops reporting?

Started by Riverwind, September 07, 2014, 02:15:12 PM

Previous topic - Next topic

Riverwind

I have recently installed the latest firmware and am seeing Mymidnite stop reporting. This has happened twice and does not correct itself. Local status keeps working but I have no data on Mymidnite. Have to reset unit to get it to start reporting again. Any ideas why this is happening?

RW

jimbo

Mine has stopped reading 2 days in a row at 11:58am.

jimbo



Halfcrazy

I have not had any other complaints. Maybe if it is not to much trouble you could revert one Classic back to the last version you where running and see if it goes away? I wonder if it is just coincidence?
Changing the way wind turbines operate one smoke filled box at a time

jimbo

My system is a couple of hours away so i won't be able to.  It has been working flawlessly since i updated it and added the whizbang 2 months or so ago.  On the weekend i had to work on the batteries so i simply shut the circuit breaker from the panels for 20 minutes or so and also adjusted the end amps down 2 amps. Nothing else i can think of.  Here is a screen shot of the last 3 days.

jimbo

It decided to work normally today without any intervention!

TomW

Makes me wonder if you are using DHCP to get network settings for the Classic?

If so they often have a "lease" time and you may not get a proper DHCP setup until the lease on the original IP expires?


If you have it set for a static IP (best) then this will not apply.

Grasping straws here but possible.

Tom
Do NOT mistake me for any kind of "expert".

( ͡° ͜ʖ ͡°)


24 Trina 310 watt modules, SMA SunnyBoy 7.7 KW Grid Tie inverter.

I thought that they were angels, but much to my surprise, We climbed aboard their starship and headed for the skies

jimbo

Im not really sure what you are talking about lol  :D

TomW

To paraphrase:

"Some odd and occasionally self healing network problem that prevents communication"

T
Do NOT mistake me for any kind of "expert".

( ͡° ͜ʖ ͡°)


24 Trina 310 watt modules, SMA SunnyBoy 7.7 KW Grid Tie inverter.

I thought that they were angels, but much to my surprise, We climbed aboard their starship and headed for the skies

atop8918


Riverwind

My problem occurred twice and seems to have self healed. It's only been a couple of weeks so will advise of any recurrence.

RW

Riverwind

Sadly it appears to have cropped up again. See this latest screen shot. The wind Classic is reporting but the Solar is down and the Local Status Panel works correctly. Anybody have any ideas??

atop8918

This might be a network problem. Are both units running on the same network or is there something in between one and not the other? The Classic-MyMidNite connection is not very tolerant of high traffic as well, are you running bit-torrent or Dropbox on the same network? If so you may consider separating the classic and home networks so that they don't confuse each other.
I'm sitting on a new version of the mymidnite protocol which should be much more fault tolerant. I will release as beta when I get the green light from the boss.

Halfcrazy

Not the boss but here ya go  ;D
Changing the way wind turbines operate one smoke filled box at a time