Error COM 8 in use or not exist

Started by leericmarvin, January 17, 2015, 01:55:56 PM

Previous topic - Next topic

leericmarvin

OK, there is size limit per post, here is the remained of the last post:

Port Forwarding
   #   Service Name   Start Port   End Port   Server IP Address
   1   HTTP                  80      80              192.168.0.4


Attached Devices
#   IP Address   Device Name           MAC Address
1   192.168.0.4   UNKNOWN NAME   60:1d:0f:00:27:f3
2   192.168.0.6   LSM2                   b8:ee:65:ae:aa:90
3   192.168.0.7   CATHYS-IPAD           04:54:53:3b:06:e1

LAN TCP/IP Setup

IP Address   192.168.0.1
IP Subnet Mask   255.255.255.0
RIP Direction    Both
RIP Version   RIP_1
Use Router as DHCP Server
Starting IP Address   ...
Ending IP Address   ...
Address Reservation
   #   IP Address   Device Name   Mac Address
   1   192.168.0.4   Classic   60:1d:0f:00:27:f3
   2   192.168.0.5   LSM2   b8:ee:65:ae:aa:90
   3   192.168.0.5   LSM2   00:8c:fa:80:5f:f7
   4   192.168.0.7   Cathy's iPad   04:54:53:3b:06:e1

A PocketPort2 Modem Bridge configured to pass everything coming in via the Seirra 313U to the router.
I can provide details if requested.

After I get this post off... I'll power cycle the Seirra/Pocketport/router one more time.
From the above, is anything out of the ordinary?

ClassicCrazy

I never had to do anything special  for MyMidnite - I believe the classic calls out on internet when you turn Web Access Enabled on . Tech section of the Local Status App config or there is a menu item for it in MNGP. You need to register on the My Midnite site.
system 1
Classic 150 , 5s3p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal 24v pack , Outback 3524 inverter
 5s 135w Kyocero , 3s3p 270w Kyocera   Classic 150 ,8s2p  Kyocera 225w to Hawkes Bay Jakiper 48v 20kwh  ,Gobel 16 kwh  lifepo4 Outback VFX 3648  8s2p 380w Rec pv EG4 6000XP

leericmarvin

#17
I have register at mymidnite.com and added a device.   I did wonder about the space in the 8 digit device ID.

My device at mymidnite.com  has a space in the device ID, can this be an issue? 



Westbranch

LeEric.  You might want to start a new thread under  My MidNite Monitoring as the topic of this thread will not attract My MidNite user fans
http://midniteforum.com/index.php?board=15.0

Also have you been able to connect the Local App directly and then by wifi on location?

Eric
KID FW1811 560W >C&D 24V 900Ah AGM
CL150 29032 FW V.2126-NW2097-GP2133 175A E-Panel WBjr, 3Px4s 140W > 24V 900Ah AGM,
2 Cisco WRT54GL i/c DD-WRT Rtr, NetGr DS104Hub
Cotek ST1500 Inv  want a 24V  ROSIE Inverter
OmniCharge3024  Eu1/2/3000iGens
West Chilcotin 1680+W to come

boB

Did MyMidnite use to work and now does not ?
I am unaware of any changes regarding that but depending on where in the world you are,
sometimes the IP address has to change from the default.  In the NET menu of the MNGP
is a setting called MM which allows another IP address to be entered.

I seem to remember that Africa needed another IP address for MM.
Not sure if this has anything at all to do with your problem ?

Take a look at this thread, just in case.

http://midniteforum.com/index.php?topic=1966.msg20911#msg20911

boB
K7IQ 🌛  He/She/Me