random date/time resets (again)

Started by dgd, September 04, 2015, 06:25:26 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

dgd

September 04, 2015, 06:25:26 PM Last Edit: September 04, 2015, 06:36:14 PM by dgd
Just wondering if there has been any updates for this problem in the later releases of the MNGP firmware, since the 1849 version?
This has not been a great concern until I started processing reports and graphs for periods more than a few hours. The 10 minute log below shows the time resetting just after 16:48 and later at 20:17 where I corrected it. Its ok if I catch it before a day rolls over otherwise it messes up the day log file data
The problem seems to be in the MNGP as its time is changed.
I know there are many ways around this but it would be nice to have the bug removed from the MNGP firmware.

dgd
Classic 250, 150,  20 140w, 6 250w PVs, 2Kw turbine, MN ac Clipper, Epanel/MNdc, Trace SW3024E (1997), Century 1050Ah 24V FLA (1999). Arduino power monitoring and web server.  Off grid since 4/2000
West Auckland, New Zealand
Print
Go Up Pages1
User actions