Aux 1 appears not to be working...

Started by openplanet, November 10, 2017, 12:28:02 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

openplanet

November 10, 2017, 12:28:02 PM
I have two Classics.  Firmware up to date. Same symptom on both:

Aux 1 set to Manual Off - 0 volts
Aux 1 set to Manual ON - 0 volts, and Classic's red LED comes on.

Thoughts?
Thanks.
_______________________________________
We are star dust [on a] pale blue dot.
[And yes,] there is grandeur in this view of life.
Joni Mitchell, Carl Sagan, Charles Darwin

https://www.youtube.com/watch?v=cIANk7zQ05w

ClassicCrazy

#1
November 10, 2017, 01:15:28 PM
Look in the manual - there are some jumpers inside the Classic that change the AUX output.

Larry
system 1
Classic 150 , 5s3p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal 24v pack , Outback 3524 inverter
 5s 135w Kyocero , 3s3p 270w Kyocera   Classic 150 ,8s2p  Kyocera 225w to Hawkes Bay Jakiper 48v 20kwh  ,Gobel 16 kwh  lifepo4 Outback VFX 3648  8s2p 380w Rec pv EG4 6000XP

Westbranch

#2
November 10, 2017, 01:31:11 PM
Were they 'set' via the MNGP,  the Local App or the jumpers?
WBjr?
KID FW1811 560W >C&D 24V 900Ah AGM
CL150 29032 FW V.2126-NW2097-GP2133 175A E-Panel WBjr, 3Px4s 140W > 24V 900Ah AGM,
2 Cisco WRT54GL i/c DD-WRT Rtr, NetGr DS104Hub
Cotek ST1500 Inv  want a 24V  ROSIE Inverter
OmniCharge3024  Eu1/2/3000iGens
West Chilcotin 1680+W to come
Print
Go Up Pages1
User actions