News:

To visit MidNite Solar click this link www.midnitesolar.com

Main Menu

Hi Temp setting

Started by Beyla, May 03, 2021, 08:48:39 AM

Previous topic - Next topic

Beyla

Hi, I noticed the Hi-Temp setting is very high (something like 176 degrees C)  from factory settings is this normal?
What value should this be set at? Ty.

ClassicCrazy

High temperature setting for what ?

Larry
system 1
Classic 150 , 5s3p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal 24v pack , Outback 3524 inverter
 5s 135w Kyocero , 3s3p 270w Kyocera   Classic 150 ,8s2p  Kyocera 225w to Hawkes Bay Jakiper 48v 20kwh  ,Gobel 16 kwh  lifepo4 Outback VFX 3648  8s2p 380w Rec pv EG4 6000XP

Beyla

Menu..Charge..Battery Menu...Limits.... last item is Hi Batt, set to 170 degrees Celsius. That is ridiculously high.

boB

Quote from: Beyla on May 03, 2021, 04:00:08 PM
Menu..Charge..Battery Menu...Limits.... last item is Hi Batt, set to 170 degrees Celsius. That is ridiculously high.


Yes, you're right.   It is set ridiculously high so that it is "disabled"

Setting it to a correct setting for your batteries would be dependent on your particular battery specs.

That is why it is REAL high as a default.   I agree that it could have ben lower, say, 100C

K7IQ 🌛  He/She/Me

ClassicCrazy

Quote from: boB on May 03, 2021, 04:47:02 PM
Quote from: Beyla on May 03, 2021, 04:00:08 PM
Menu..Charge..Battery Menu...Limits.... last item is Hi Batt, set to 170 degrees Celsius. That is ridiculously high.


Yes, you're right.   It is set ridiculously high so that it is "disabled"

Setting it to a correct setting for your batteries would be dependent on your particular battery specs.

That is why it is REAL high as a default.   I agree that it could have ben lower, say, 100C

Is that just an alarm Bob - or does it cut off battery charging ?  I couldn't find anything about it in the Classic Manual.

Larry
system 1
Classic 150 , 5s3p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal 24v pack , Outback 3524 inverter
 5s 135w Kyocero , 3s3p 270w Kyocera   Classic 150 ,8s2p  Kyocera 225w to Hawkes Bay Jakiper 48v 20kwh  ,Gobel 16 kwh  lifepo4 Outback VFX 3648  8s2p 380w Rec pv EG4 6000XP

boB


It cuts off the charging.    It was a relatively new  feature and did not get a spot in the manual yet.

I think there was one customer that really needed it but should have been there in the beginning.

Another temperature feature that really should be in there would be a low temperature cutoff for Lithium batteries.

K7IQ 🌛  He/She/Me

ClassicCrazy

Quote from: boB on May 03, 2021, 07:07:17 PM

It cuts off the charging.    It was a relatively new  feature and did not get a spot in the manual yet.

I think there was one customer that really needed it but should have been there in the beginning.

Another temperature feature that really should be in there would be a low temperature cutoff for Lithium batteries.

Yes on the low temp cutoff for lithium !

Larry
system 1
Classic 150 , 5s3p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal 24v pack , Outback 3524 inverter
 5s 135w Kyocero , 3s3p 270w Kyocera   Classic 150 ,8s2p  Kyocera 225w to Hawkes Bay Jakiper 48v 20kwh  ,Gobel 16 kwh  lifepo4 Outback VFX 3648  8s2p 380w Rec pv EG4 6000XP

Beyla

Thank you both for responding, much appreciated. Now I know.  :)