News:

To visit MidNite Solar click this link www.midnitesolar.com

Main Menu

The grid AC in to Rosie + battery

Started by holdmode, May 08, 2025, 10:54:26 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

holdmode

May 08, 2025, 10:54:26 PM
The Grid to AC in to Rosie. How to program Rosie to not use the battery power. I want to program Rosie day and night use the grid, in case of power outage Rosie switch to the battery.

Or Rosie is ready
Thank you...!! :)

FNG

#1
May 09, 2025, 05:00:28 AM
By default that is how Rosie is programmed. It will always use the grid if its present.

holdmode

#2
May 10, 2025, 01:02:19 PM
Quote from: FNG on May 09, 2025, 05:00:28 AMBy default that is how Rosie is programmed. It will always use the grid if its present.
Thank you..

holdmode

#3
May 10, 2025, 01:12:03 PM
I have the other question Rosie has a Can bus, can I use that port for RS485.
Thanks

mahendra

#4
May 11, 2025, 12:38:59 AM
Quote from: holdmode on May 10, 2025, 01:12:03 PMI have the other question Rosie has a Can bus, can I use that port for RS485.
Thanks

CAN and RS485 uses different pin outs and they are not the same .

Think you will have to allow Midnite to chin in that one
1.5kw on Midnite classic 150(whizbang jr.) networked 0.660kw on classic lite 200 wbjr ,180ah CALB Lifepo4 48v battery bank,jkbms 150amps bms(top balanced) Outback vfx3648.
Soon to be added Sol Ark 8k with 5Dyness Bx51000 ,7.8kw pv

holdmode

#5
May 12, 2025, 11:47:35 AM
Quote from: mahendra on May 11, 2025, 12:38:59 AM
Quote from: holdmode on May 10, 2025, 01:12:03 PMI have the other question Rosie has a Can bus, can I use that port for RS485.
Thanks

CAN and RS485 uses different pin outs and they are not the same .

Think you will have to allow Midnite to chin in that one
Thank you for the support and information.
Print
Go Up Pages1
User actions