MyMidNite registration not working?

Started by marioluomo, July 05, 2026, 06:04:41 PM

Previous topic - Next topic

marioluomo

Hi everyone,

I'm new to MidNite Solar. I recently bought a property that already has a MidNite Solar Classic 200 installed. I've connected it to the internet and would like to view its data and statistics.

Is https://mymidnite2.com/ still the correct place to register and monitor the controller?

When I try to create an account, I receive the error:

"Unable to send e-mail. Contact the site administrator if the problem persists."

I also never receive the confirmation email, so I can't complete the registration.

Has anyone else run into this issue recently? Is there a different way to access the data or another portal I should be using?

Any guidance would be greatly appreciated. Thanks!


ClassicCrazy

#1
there are other options to monitor your Classic.
Do you want remote access ? Or just local.
For local you can't beat using Home Assistant and the Classic integration .
https://github.com/qcda1/ha_midnite_classic
Also there is a local android app
https://github.com/ClassicDIY/ClassicMonitor
Also on the ClassicDIY github there are some other options.
I haven't set up the MyMidnite in a long time or checked into it.
There were some stripped down Midnite Classic 200's out there in the past 10 years that were sold at an auction and on solar trailers.
Those didn't have all the features of full equipped Classic . I just mention it in case you have one of those models. There is info about those on the forum here somewhere.
Larry
system 1
Classic 150 , 5s3p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal 24v pack , Outback 3524 inverter
 5s 135w Kyocero , 3s3p 270w Kyocera   Classic 150 ,8s2p  Kyocera 225w to Hawkes Bay Jakiper 48v 20kwh  ,Gobel 16 kwh  lifepo4 Outback VFX 3648  8s2p 380w Rec pv EG4 6000XP