primus wind power

Started by mahendra, June 28, 2013, 06:39:18 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

mahendra

June 28, 2013, 06:39:18 PM
hi are there wind curves for primus wind turbines? for classics
1.5kw on Midnite classic 150(whizbang jr.) networked 0.660kw on classic lite 200 ,180ah CALB Lifepo4 48v battery bank,123SmartBMS bms(top balanced) Outback vfx3648

Westbranch

#1
June 28, 2013, 07:03:21 PM
Mahendra, the model of the turbine might help also....?
KID FW1811 560W >C&D 24V 900Ah AGM
CL150 29032 FW V.2126-NW2097-GP2133 175A E-Panel WBjr, 3Px4s 140W > 24V 900Ah AGM,
2 Cisco WRT54GL i/c DD-WRT Rtr, NetGr DS104Hub
Cotek ST1500 Inv  want a 24V  ROSIE Inverter
OmniCharge3024  Eu1/2/3000iGens
West Chilcotin 1680+W to come

Halfcrazy

#2
June 28, 2013, 07:22:48 PM
Remind me is the Primus the whisper or the Air?

Ryan
Changing the way wind turbines operate one smoke filled box at a time

mahendra

#3
June 29, 2013, 05:36:11 AM
its actually an air 40
1.5kw on Midnite classic 150(whizbang jr.) networked 0.660kw on classic lite 200 ,180ah CALB Lifepo4 48v battery bank,123SmartBMS bms(top balanced) Outback vfx3648

Halfcrazy

#4
June 29, 2013, 05:47:03 AM
I believe the Air had its own electronics? If so I am also remembering it needed to see battery voltage to turn on? I will have to look deeper into this.

Ryan
Changing the way wind turbines operate one smoke filled box at a time

mahendra

#5
June 29, 2013, 06:43:26 AM
 i know it has its own electronics but it can also be used with an external controller(according to the manual:says to turn voltage setting screw way up to defeat built in charge controller settings),which i wish to do main reason because i have a 48v turbine and 12v battery bank.
1.5kw on Midnite classic 150(whizbang jr.) networked 0.660kw on classic lite 200 ,180ah CALB Lifepo4 48v battery bank,123SmartBMS bms(top balanced) Outback vfx3648

mahendra

#6
June 29, 2013, 06:45:37 AM
the other reason is syncing stages. because i already have two classics networked for follow me.dont mind getting a third to make charging better.
1.5kw on Midnite classic 150(whizbang jr.) networked 0.660kw on classic lite 200 ,180ah CALB Lifepo4 48v battery bank,123SmartBMS bms(top balanced) Outback vfx3648

Halfcrazy

#7
June 29, 2013, 10:33:28 AM
Ah ok. Well there is not a preset curve as such but it would not be hard to dial one in pretty quick. I can also work with Primus and see if they have any interest in giving us the power curve.

Ryan
Changing the way wind turbines operate one smoke filled box at a time

mahendra

#8
July 02, 2013, 05:56:23 PM
thanks
1.5kw on Midnite classic 150(whizbang jr.) networked 0.660kw on classic lite 200 ,180ah CALB Lifepo4 48v battery bank,123SmartBMS bms(top balanced) Outback vfx3648

dgd

#9
July 02, 2013, 09:55:25 PM
Ryan,

I know everyone has been real busy at MN but any further thoughts on the wind curve learning addition to firmware?

dgd
Classic 250, 150,  20 140w, 6 250w PVs, 2Kw turbine, MN ac Clipper, Epanel/MNdc, Trace SW3024E (1997), Century 1050Ah 24V FLA (1999). Arduino power monitoring and web server.  Off grid since 4/2000
West Auckland, New Zealand

Halfcrazy

#10
July 03, 2013, 09:55:13 AM
It is still really close to the top of the list. boB has a few things above it but it is still a priority.

Ryan
Changing the way wind turbines operate one smoke filled box at a time

boB

#11
July 03, 2013, 05:24:19 PM
Quote from: dgd on July 02, 2013, 09:55:25 PM
Ryan,

I know everyone has been real busy at MN but any further thoughts on the wind curve learning addition to firmware?

dgd


Yes, that's the FUN stuff !!   Murphy's law says that this cannot be the absolute top item on the list !  (I think)

boB
K7IQ 🌛  He/She/Me
Print
Go Up Pages1
User actions