How to use the Aux contacts in the Classic

Started by Halfcrazy, June 10, 2011, 11:38:15 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Halfcrazy

June 10, 2011, 11:38:15 AM
Below I will describe the Aux 1 and 2 functions off the Classic each reply will be a single mode. If you have any questions please start a thread in the Charge Controller section.
Changing the way wind turbines operate one smoke filled box at a time

Halfcrazy

#1
June 10, 2011, 11:40:05 AM
We have implemented the Vent fan function into the Classic's Aux 1. It requires 6-9-2011 code or newer. Here is a link to the one page setup guide. http://dl.dropbox.com/u/31975941/Vent%20Fan.pdf
Changing the way wind turbines operate one smoke filled box at a time

Halfcrazy

#2
June 10, 2011, 11:42:50 AM
There is a Nite Lite function in Aux 1 and Aux 2 this allows you to control a lite or other load turning it on at dusk and off at dawn. Here is a link to the one page instruction sheet on using this feature. http://dl.dropbox.com/u/31975941/Nite%20Lite.pdf
Changing the way wind turbines operate one smoke filled box at a time
Print
Go Up Pages1
User actions