Failed firmware update

Started by Wxboy, May 16, 2015, 10:49:58 AM

Previous topic - Next topic

Halfcrazy

no the order should not matter at all. I tend to prefer to do the MNGP first as it is usually the one that gives problems if either one is going to. That way if you get the MNGP the Classic should go no issue.

Of course the MNGP has to be plugged in to update (YES I have been there and done that witht he MNGP on the bench and me swearing why wont this blankedy thing update  ::)  )
Changing the way wind turbines operate one smoke filled box at a time

Resthome

Quote from: Halfcrazy on May 19, 2015, 11:18:04 AM
no the order should not matter at all. I tend to prefer to do the MNGP first as it is usually the one that gives problems if either one is going to. That way if you get the MNGP the Classic should go no issue.

Of course the MNGP has to be plugged in to update (YES I have been there and done that witht he MNGP on the bench and me swearing why wont this blankedy thing update  ::)  )

Thanks for the clarification on this. I suspected that was the case but good to know.
John

10 x Kyocera KC140, Classic 150 w/WBJr, Link10 Battery Monitor, 850 AH @ 12v Solar One 2v cells, Xantrex PROwatt SW2000
Off Grid on Houseboat Lake Don Pedro, CA