Network disconnects since updating to 2079 FW

Started by dRdoS7, January 09, 2016, 06:36:23 PM

Previous topic - Next topic

dRdoS7

Hi,

I updated my Classic 200, about end Nov, to 2079. I was happy with the existing FW, but due to the old MyMidnite being shutdown in Feb, thought I should do it. I don't use MM much, just when we're away from our house for more than a week or so.

A few days after the update I had no LA data.

Since the update I've a total of 3 disconnects, LA & MM get nothing.

The last 2 have happened after 10 days each time.

I have to reboot the Classic to get network connection.

I haven't any problem with other LAN devices, so must be the 200. Plus, it was rock solid prior to the update.

The Classic otherwise is running fine.

Any ideas?

Thanks,

dRdoS7

ClassicCrazy

Since I did that update I have had to restart my Classic a couple times too .  And like you mentioned - the previous firmware never did that.

The Local Status app also seems to be a bit fussier about making the connection too.

Larry
system 1
Classic 150 , 5s3p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal 24v pack , Outback 3524 inverter
 5s 135w Kyocero , 3s3p 270w Kyocera   Classic 150 ,8s2p  Kyocera 225w to Hawkes Bay Jakiper 48v 20kwh  ,Gobel 16 kwh  lifepo4 Outback VFX 3648  8s2p 380w Rec pv EG4 6000XP

dRdoS7

#2
Hi,

Quote from: ClassicCrazy on January 09, 2016, 07:47:47 PM
Since I did that update I have had to restart my Classic a couple times too .  And like you mentioned - the previous firmware never did that.

The Local Status app also seems to be a bit fussier about making the connection too.

Larry

Guess we need your brother Half to pop by!

dRdoS7

Westbranch

Ryan calls the shots AFAIK....More like you need Andrew, he built the data base and keeps it going, just that he is in Europe... so a 8 hr +- delay...
KID FW1811 560W >C&D 24V 900Ah AGM
CL150 29032 FW V.2126-NW2097-GP2133 175A E-Panel WBjr, 3Px4s 140W > 24V 900Ah AGM,
2 Cisco WRT54GL i/c DD-WRT Rtr, NetGr DS104Hub
Cotek ST1500 Inv  want a 24V  ROSIE Inverter
OmniCharge3024  Eu1/2/3000iGens
West Chilcotin 1680+W to come

Resthome

#4
Because of the winter I haven't updated to this latest firmware. But it sounds like some of the existing network connections problem persist with this new version that was suppose to resolve the the network disconnects. If that is the case it is disappointing that this bug has existed for so long. 

Hopefully others will weigh in with their results good or bad with regards to this issue both with the LA and MM.
John

10 x Kyocera KC140, Classic 150 w/WBJr, Link10 Battery Monitor, 850 AH @ 12v Solar One 2v cells, Xantrex PROwatt SW2000
Off Grid on Houseboat Lake Don Pedro, CA

boB

What I am hearing is that evidently when the Local App stops talking with 2079 that there is another piece of
software that will continue to work and talk with the Classic instead of the LA.  I think that there  is a version
of that software (Karl's) on this site but don't know where right at the moment.  This is PC software and not
code for Android or iPhone.  Can't remember the name right off but uses modbus over  TCP/IP.

Happy new year !  But not as happy as it would be if this problem didn't' still exist.

boB
K7IQ 🌛  He/She/Me

Halfcrazy

Andrew is tracking this down, What it seems like is that My MidNite is sending back a corrupt packet and that kills the network stack in the Classic. I can confirm this IS related to My Midnite and those not using My Midnite seem to be reporting 2079 as perfectly stable on the TCP/IP connection
Changing the way wind turbines operate one smoke filled box at a time

Resthome

Quote from: Halfcrazy on January 10, 2016, 08:58:16 AM
Andrew is tracking this down, What it seems like is that My MidNite is sending back a corrupt packet and that kills the network stack in the Classic. I can confirm this IS related to My Midnite and those not using My Midnite seem to be reporting 2079 as perfectly stable on the TCP/IP connection

Ryan, both ClassicCrazy and dRdoS7 have reported connections problem with the Local App above. Hopefully those that don't have problems as well as those that do will report their results here on both the LA and MM. Some folks just don't really use the LA. So it would be nice to know what they use and don't use. A more scientific survey on whether the Ethernet connection problems have been resolved for both the Local App and MyMidnite would be great.

Once El Nino fills up our lakes I'll be able to update to the latest firmware and report my own results.
John

10 x Kyocera KC140, Classic 150 w/WBJr, Link10 Battery Monitor, 850 AH @ 12v Solar One 2v cells, Xantrex PROwatt SW2000
Off Grid on Houseboat Lake Don Pedro, CA

dRdoS7

#8
Hi,

It looks as though it was 3 times it reset with 10 day intervals, I hadn't scrolled back far enough in MM. The new MM is "slightly" different to the MM I'm used to.

Next "event" is due about 20th Jan.

dRdoS7

zoneblue

I dont use MM, and only occasionally use the LA (configuration), but the blackbox runs on a very similar basis to the LA (persistant / blocking modbus over ethernet connection) and at a more aggressive timing rate, (1s instead of 2s). Since 2074/2079, the connection has given zero issues either disconnects, or resets. Thus im confident that the core stack is now fixed. However what the LA and MM contribute to all this i couldnt say.
6x300W CSUN, ground mount, CL150Lite, 2V/400AhToyo AGM,  Outback VFX3024E, Steca Solarix PL1100
http://www.zoneblue.org/cms/page.php?view=off-grid-solar

dgd

Zb,

I would have to agree with that. Upfirmwared a C150 to 2709 a few weeks ago using W10 (that was an 'interesting' exercise) and using a DUE to extract limited registers every <1s over tcp AND it has run very problem free.
Judging by how quickly the gauges refresh I'd say every half second register readings.
No delays, hiccups, hangups, weird things etc.
I do not open/close the connection, it just stays open, 26 days and counting... Don't use MyMN or LA.

dgd
Classic 250, 150,  20 140w, 6 250w PVs, 2Kw turbine, MN ac Clipper, Epanel/MNdc, Trace SW3024E (1997), Century 1050Ah 24V FLA (1999). Arduino power monitoring and web server.  Off grid since 4/2000
West Auckland, New Zealand

boB

Quote from: dgd on January 11, 2016, 03:20:28 PM
Zb,

I would have to agree with that. Upfirmwared a C150 to 2709 a few weeks ago using W10 (that was an 'interesting' exercise) and using a DUE to extract limited registers every <1s over tcp AND it has run very problem free.
Judging by how quickly the gauges refresh I'd say every half second register readings.
No delays, hiccups, hangups, weird things etc.
I do not open/close the connection, it just stays open, 26 days and counting... Don't use MyMN or LA.

dgd

What SWare you using dgd ?  Is web access enabled or off ?
K7IQ 🌛  He/She/Me

Westbranch

My $$ is on the latest  Black Box variant (ie. 'DUE')
KID FW1811 560W >C&D 24V 900Ah AGM
CL150 29032 FW V.2126-NW2097-GP2133 175A E-Panel WBjr, 3Px4s 140W > 24V 900Ah AGM,
2 Cisco WRT54GL i/c DD-WRT Rtr, NetGr DS104Hub
Cotek ST1500 Inv  want a 24V  ROSIE Inverter
OmniCharge3024  Eu1/2/3000iGens
West Chilcotin 1680+W to come

Cniemand

FW 2079 : I rarely log into MM. Often I check into the LA a few times a day to get a reading and then leave it in the background on my macbook air. Other times I use the third-party Android app, which works quite well. I haven't noticed any issues with 2079. The only downside (to myself) is that you are only able to have one connection at a time. Either the LA on one computer but not multiples or the android app.

Is it possible to eventually have multiple connections?
OFF-GRID @ 8500FT : 2000w Array : 8 - CS6P-250P ; VFX 3648 ; WBjr ; MN CL200 #6738 ; FW #2079  
48v LiFePo4 : 16 - CALB CA 100 aH in Series - 5 kWh ; No Active BMS - Bottom Balanced
Charging Parameters : Bulk - 55v, Absorb - 5 EndAmps @ 55v, Float - 54v or 3.375v per Cell : ZERO EQUALIZE

ClassicCrazy

Mymidnite quit reporting my system yesterday at about 11:15 am central time - in an auto equalize cycle. I won't be able to get out and check if it is also locked up for Local Status app connections or if it is an internet problem on my end until the weekend.

I also reported it on the mymidnite contact form in case it was something that needs to be looked at on Midnite end .

Larry
system 1
Classic 150 , 5s3p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal 24v pack , Outback 3524 inverter
 5s 135w Kyocero , 3s3p 270w Kyocera   Classic 150 ,8s2p  Kyocera 225w to Hawkes Bay Jakiper 48v 20kwh  ,Gobel 16 kwh  lifepo4 Outback VFX 3648  8s2p 380w Rec pv EG4 6000XP