AC Disconnect Switch for Inverter

Started by zulu, January 25, 2022, 07:14:41 PM

Previous topic - Next topic

zulu

I need a recommendation for an AC disconnect make/break switch that sits between a 50A AC power source and a 3000W Inverter/Charger.

ClassicCrazy

Seems like any electrical supplier would have an AC disconnect that could handle that .
Depends on if you want a toggle type switch, turn style switch, or blade or pull out disconnect.
Some are three phase.  Also depends if you want it outside and weather proof or indoors, what you want to mount it in or if it should be self contained in a box already.
Also depends on how much you want to spend .
I just did a search online - lots of choices but I don't have any particular experience or recommendations on particulars.
Larry
system 1
Classic 150 , 5s3p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal for 24v pack , Outback 3524 inverter
system 2
 5s 135w Kyocero , 3s3p 270w Kyocera  to Classic 150 ,   8s Kyocera 225w to Hawkes Bay Jakiper 48v 15kwh LiFePO4 , Outback VFX 3648 inverter
system 3
KID / Brat portable

mike90045

Do you need a simple AC disconnect , or are you asking about an AC Transfer Switch  ( manual or automatic )   ?
http://tinyurl.com/LMR-Solar

Classic 200| 2Kw PV, 160Voc | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph )| Listeroid 6/1, st5 gen head | XW6048 inverter/chgr | midnight ePanel & 4 SPDs | 48V, 800A NiFe battery bank | MS-TS-MPPT60 w/3Kw PV