Reset of KWhr and Ahr

Started by Kent3, September 02, 2022, 03:32:56 PM

Previous topic - Next topic

Kent3

Hi, it's  been 4-5 years since I have
been on the forum. I have noticed that the KW and Ahr
Totals have not been resetting.  Is there a parameter
That I need to set. Thank you for any help.
Kent3
6 - 150 Watt PV, 210Ah /24V FLA Battery Bank, 2-MN-Kid CC w/WBjr and 2-MNBTS, eu2000i, eu3000i,  Samlex 1000 Watt PSW, 1000 Watt MSW,    Linux user

ClassicCrazy

I looked in the kid manual online - hopefully the most recent one.
It says
Data Menu:
Displays 31 days of saved data. After 31 days, stored memories are overwritten leaving the last 31
days. Recorded data includes Max Battery Voltage, Min Battery Voltage, KWH produced, Max Watts,
and Max Batt Temp

So if it is not resetting every month not sure what to try except maybe resetting the whole controller to default.
But then you would need to make sure you put back in all your settings that you have now.

Larry
system 1
Classic 150 , 5s3p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal for 24v pack , Outback 3524 inverter
system 2
 5s 135w Kyocero , 3s3p 270w Kyocera  to Classic 150 ,   8s Kyocera 225w to Hawkes Bay Jakiper 48v 15kwh LiFePO4 , Outback VFX 3648 inverter
system 3
KID / Brat portable

Kent3

Thanks for the information Larry. I checked the software version on Kid #1 and it's 1864. Kid #1 resets every night like the Kid manual says.

" This fith status screen is showing daily power produced in Kilowatt hours and Amphours." Page 23. 10-268-1 Rev E
Is there a button on this screen to see each day so far what the values are ?

Kid #2 has software version # 1811.
This one is not resetting every night.
I understand why they would save one months data. Maybe the answer is to update Kid #2 to 1864.

I would be curious to know if there are any Kids out there with software 1864 that resets these values every night.
Thanks for getting me to dig deeper into what is causing the Kids to act differently.

Kent3
6 - 150 Watt PV, 210Ah /24V FLA Battery Bank, 2-MN-Kid CC w/WBjr and 2-MNBTS, eu2000i, eu3000i,  Samlex 1000 Watt PSW, 1000 Watt MSW,    Linux user

ClassicCrazy

#3
Quote from: Kent3 on September 10, 2022, 10:10:29 AM
Thanks for the information Larry. I checked the software version on Kid #1 and it's 1864. Kid #1 resets every night like the Kid manual says.

" This fith status screen is showing daily power produced in Kilowatt hours and Amphours." Page 23. 10-268-1 Rev E
Is there a button on this screen to see each day so far what the values are ?

Kid #2 has software version # 1811.
This one is not resetting every night.
I understand why they would save one months data. Maybe the answer is to update Kid #2 to 1864.

I would be curious to know if there are any Kids out there with software 1864 that resets these values every night.
Thanks for getting me to dig deeper into what is causing the Kids to act differently.

Kent3

You will have to dig back through discussion of past forums on the Kid. I know some of the revisions fixed some things or updated them.
Ryan posted recently that there was a new version that improved it's tracking performance.
Here is that post
http://midniteftp.com/forum/index.php?topic=4127.msg53557#msg53557
If it was me I would probably update it.
Larry
system 1
Classic 150 , 5s3p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal for 24v pack , Outback 3524 inverter
system 2
 5s 135w Kyocero , 3s3p 270w Kyocera  to Classic 150 ,   8s Kyocera 225w to Hawkes Bay Jakiper 48v 15kwh LiFePO4 , Outback VFX 3648 inverter
system 3
KID / Brat portable

Kent3

6 - 150 Watt PV, 210Ah /24V FLA Battery Bank, 2-MN-Kid CC w/WBjr and 2-MNBTS, eu2000i, eu3000i,  Samlex 1000 Watt PSW, 1000 Watt MSW,    Linux user