New Off Grid Inverter Charger

Started by nigel, June 15, 2012, 11:17:27 AM

Previous topic - Next topic

Westbranch

Looks a right proper terminal block, 4 ga.?,  rather than those screws in the classic.. 8)
KID FW1811 560W >C&D 24V 900Ah AGM
CL150 29032 FW V.2126-NW2097-GP2133 175A E-Panel WBjr, 3Px4s 140W > 24V 900Ah AGM,
2 Cisco WRT54GL i/c DD-WRT Rtr, NetGr DS104Hub
Cotek ST1500 Inv  want a 24V  ROSIE Inverter
OmniCharge3024  Eu1/2/3000iGens
West Chilcotin 1680+W to come

onanparts

Quote from: Westbranch on April 05, 2016, 12:56:46 AM
Looks a right proper terminal block, 4 ga.?,  rather than those screws in the classic.. 8)

That's one of the AC side terminals..... :)
I got the deluxe kit, it had a solar cell and a meter.

Midnite B17-10. 50kW Cont. 150kW Surge... Me/Myself/And/I

mike90045

Quote from: onanparts on April 05, 2016, 12:24:16 AM
I think this is the Dilithium Crystal Chamber of the EGo...but not really certain.

Thermal compliant interface to heat sink ?
http://tinyurl.com/LMR-Solar

Classic 200| 2Kw PV, 160Voc | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph )| Listeroid 6/1, st5 gen head | XW6048 inverter/chgr | midnight ePanel & 4 SPDs | 48V, 800A NiFe battery bank | MS-TS-MPPT60 w/3Kw PV

Resthome

Oh no, more screw terminal for cables. Sure would be nice to see posts for lug terminals.   ::)
John

10 x Kyocera KC140, Classic 150 w/WBJr, Link10 Battery Monitor, 850 AH @ 12v Solar One 2v cells, Xantrex PROwatt SW2000
Off Grid on Houseboat Lake Don Pedro, CA

onanparts

Quote from: Resthome on April 05, 2016, 05:38:46 PM
Oh no, more screw terminal for cables. Sure would be nice to see posts for lug terminals.   ::)


Screw terminals are on the AC side. The DC side looks like this.  :)
I got the deluxe kit, it had a solar cell and a meter.

Midnite B17-10. 50kW Cont. 150kW Surge... Me/Myself/And/I

Resthome

Quote from: onanparts on April 06, 2016, 02:57:29 AM
Quote from: Resthome on April 05, 2016, 05:38:46 PM
Oh no, more screw terminal for cables. Sure would be nice to see posts for lug terminals.   ::)


Screw terminals are on the AC side. The DC side looks like this.  :)

Greate, thanks !!!  😊
John

10 x Kyocera KC140, Classic 150 w/WBJr, Link10 Battery Monitor, 850 AH @ 12v Solar One 2v cells, Xantrex PROwatt SW2000
Off Grid on Houseboat Lake Don Pedro, CA

Robin

I can't figure out two of the pictures. Di lithium crystals and the avocado. Onan Parts has a great sense of humor.
The terminal shown does accept up to 1/0, but that box lug is for internal wiring.
The AC terminal blocks, not yet revealed accept 2AWG.
The DC terminals shown use 3/8" studs.
There are 24 additional terminal blocks to accept an assortment of internal and external wires. I can't remember how many jack, but there are quite a few.
Someone mentioned "the circuit board" That makes it sound like it has only one. I'll buy dinner for anyone who can accurately guess how many boards in an EGo.
Robin Gudgel

Westbranch

Robin,after replacing a control board (?)  in a Classic, it looked to me that there are 4 , is that right?  That might give us  a base line....😂, as to where to start guessing...
KID FW1811 560W >C&D 24V 900Ah AGM
CL150 29032 FW V.2126-NW2097-GP2133 175A E-Panel WBjr, 3Px4s 140W > 24V 900Ah AGM,
2 Cisco WRT54GL i/c DD-WRT Rtr, NetGr DS104Hub
Cotek ST1500 Inv  want a 24V  ROSIE Inverter
OmniCharge3024  Eu1/2/3000iGens
West Chilcotin 1680+W to come

Robin

There can be 5 boards in a Classic. that is more than any other controller I am aware of. The EGo is nothing like a Classic though. In your wildest guess, I doubt anyone will be within 50% of the correct number!!!
Robin Gudgel

onanparts

Quote from: Robin on April 08, 2016, 01:07:09 AM
I can't figure out two of the pictures. Di lithium crystals and the avocado. Onan Parts has a great sense of humor.


:) :)

Before and after of the Dilithium Crystal conversion via PhotoShop.
I got the deluxe kit, it had a solar cell and a meter.

Midnite B17-10. 50kW Cont. 150kW Surge... Me/Myself/And/I

onanparts

Quote from: Robin on April 08, 2016, 01:07:09 AM
I can't figure out two of the pictures. Di lithium crystals and the avocado. Onan Parts has a great sense of humor.

;D
The Avocado before and after...
I got the deluxe kit, it had a solar cell and a meter.

Midnite B17-10. 50kW Cont. 150kW Surge... Me/Myself/And/I

Robin

OK, I should have been able to guess.
To all of you who have never met Onanparts........he is really weird!!!
Robin Gudgel

niel

#207
shall we all take a stab at guessing the number of boards in it? how about a prize too?

my guess----13 changed from 9 on 2nd thought. 13 is a lucky number.

Westbranch

KID FW1811 560W >C&D 24V 900Ah AGM
CL150 29032 FW V.2126-NW2097-GP2133 175A E-Panel WBjr, 3Px4s 140W > 24V 900Ah AGM,
2 Cisco WRT54GL i/c DD-WRT Rtr, NetGr DS104Hub
Cotek ST1500 Inv  want a 24V  ROSIE Inverter
OmniCharge3024  Eu1/2/3000iGens
West Chilcotin 1680+W to come

Robin

When we finally let the cat out of the bag, we will give a prize to the person that was the closest guess.
We are still not 100% sure that EGo is the final name for this inverter, so feel free to toss your hat in the ring here too. I am not crazy about the name EGo, but haven't come up with anything better. I saw a new lawn mower called the EGO yesterday. That sort of bothers me, except it was a cool looking lawn mower.
Robin Gudgel