The "LCD screen" of the Kid gone wild

Started by psp300639, March 02, 2015, 10:09:43 AM

Previous topic - Next topic
Print
Go Down Pages 1 ... 6 7 8
User actions

psp300639

#105
May 09, 2015, 07:52:44 PM Last Edit: May 09, 2015, 08:27:36 PM by psp300639
Readings from the Whizbang Jr vis a vis the Trimetric TM2030RV. For information purpose  only , I send back my Trimetric to Bogart Engineering for software upgrades to version 2.2 got the unit back last April. By the way both  units  reconciled,Happy with the results. Photo attached for reference purpose.

psp300639

#106
May 09, 2015, 08:12:54 PM
Reading from the Whizbang jr. Here's the photo attached for reference.

psp300639

#107
November 23, 2015, 06:43:36 AM
Last week I took the opportunity to update the Kid to version 1811, it appears it was stable for a while, however this evening, I notice the Kid reported the following data as follows. Photo attached for reference purpose.

psp300639

#108
November 23, 2015, 06:46:53 AM
Subsequent photo attached for reference purpose.

psp300639

#109
November 23, 2015, 06:55:53 AM
Last photo taken this evening. I'm surprise why the kid reported this way, it is suppose to be on resting mode since there is no sunlight available. I took those photo around 7:12 in the evening. Sharing my experience with kid.

ClassicCrazy

#110
November 23, 2015, 08:29:28 AM
Did you have any loads on your system ?  What happens if you turn on a load - maybe then it will switch from Float .

Larry
system 1
Classic 150 , 5s3p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal 24v pack , Outback 3524 inverter
 5s 135w Kyocero , 3s3p 270w Kyocera   Classic 150 ,8s2p  Kyocera 225w to Hawkes Bay Jakiper 48v 20kwh  ,Gobel 16 kwh  lifepo4 Outback VFX 3648  8s2p 380w Rec pv EG4 6000XP

Mario

#111
November 25, 2015, 06:08:26 PM
Do you have your Float setting at 29.2v?

It almost seems like the is a second charge source to the batteries?

The kid is producing 0.0 amps to the batteries.

Mario
Print
Go Up Pages 1 ... 6 7 8
User actions